20 Most Recent Samsung Xpress SL-C410W Laser Printer - Color - 2400 x 600 dpi Print - Plain Paper Print - Desktop 19 ppm Mono / 4 ppm Color Print - 150 sheets Input - Manual Duplex Print - Fast Ethernet - Wireless LAN - USB - Page 4 Questions & Answers

Le spie di errore rosse e di carta arancioni lampeggianti sulla stampante Samsung ML-1210 indicano un problema di alimentazione della carta. Ecco alcune possibili soluzioni:

1. Controlla se la carta ? caricata correttamente. Assicurati che la carta sia allineata correttamente e che non ci siano blocchi di carta all'interno della stampante.
2. Verifica se ci sono blocchi di carta o altri oggetti estranei all'interno della stampante. Rimuovi qualsiasi oggetto estraneo e riprova.
3. Controlla se la carta ? troppo spessa o troppo sottile per la stampante. La stampante Samsung ML-1210 funziona meglio con carta da 60-90 g/m².
4. Controlla se la leva dell'attrezzatura di regolazione della carta ? posizionata correttamente. Assicurati che la leva sia nell'impostazione corretta per il tipo di carta che stai utilizzando.
5. Controlla se il sensore di alimentazione della carta ? sporco o danneggiato. Pulisci il sensore con un batuffolo di cotone e alcool isopropilico. Se il sensore ? danneggiato, dovrai sostituire la stampante o farla riparare da un tecnico qualificato.
6. Prova a resettare la stampante. Spegni la stampante, scollegala dalla presa di corrente e lasciala spenta per almeno 10 minuti. Quindi, riaccendila e riprova.

Se nessuna di queste soluzioni risolve il problema, potrebbe essere necessario contattare l'assistenza tecnica Samsung per ulteriore assistenza.

It sounds like the print quality issue you're experiencing with your Samsung CPL-325 printer may be caused by a few different factors. Here are some steps you can take to diagnose and resolve the problem:

1. Check the toner cartridges: The first step is to check the toner cartridges to make sure they are not empty or low on toner. If they are, replace them with new cartridges. Additionally, make sure that the toner cartridges are installed properly.
2. Check the drum unit: The drum unit is responsible for transferring toner to the paper during the printing process. If it is dirty or damaged, it can cause faded or streaky print quality. Try cleaning the drum unit with a soft, dry cloth or replace it if it appears damaged.
3. Check the paper: Ensure that you are using the correct type of paper for the printer. Using paper that is too thick, too thin, or too glossy can cause print quality issues. Try using high-quality, recommended paper for your printer.
4. Check the fuser unit: The fuser unit is responsible for fixing the toner to the paper. If it is dirty or damaged, it can cause print quality issues. Try cleaning the fuser unit with a soft, dry cloth or replace it if it appears damaged.
5. Check the transfer roller: The transfer roller helps transfer toner from the drum unit to the paper. If it is dirty or damaged, it can cause print quality issues. Try cleaning the transfer roller with a soft, dry cloth or replace it if it appears damaged.
6. Check the print driver settings: Make sure that the print driver settings are configured correctly for the type of paper and print quality you are using. Adjusting the print quality settings may help improve the print quality.

do let me know if it helps

The red light flashing on your Samsung ML-1915 printer usually indicates a toner error. If you still have 10% toner left, it's possible that the toner cartridge is not making good contact with the printer, or it could be a problem with the toner sensor. To resolve the issue, try the following steps:

1. Remove the toner cartridge and gently shake it to redistribute the toner evenly.
2. Reinstall the toner cartridge and make sure it is securely in place.
3. Turn off the printer, unplug it from the power source, and wait for a few minutes. Then, plug it back in and turn it on.
4. If the problem persists, try a different toner cartridge and see if the issue is resolved.

If the above steps do not resolve the issue, it's possible that the toner sensor or the printer itself is malfunctioning. In this case, you may need to contact Samsung for further assistance.

The value of the resistor in a Samsung CLP-500 toner cartridge is not publicly available and can vary based on the specific cartridge model. It is recommended to reach out to the manufacturer or an expert for further details.

This is a problem with the tape sensor on this model fax / answering machine. I have seen it numerous times before. There is not much you can do to rectify the problem unfortunately. Sometimes a simple unplugging of the whole machine from the power source for a good two minutes, then replugging it in will get that tape sensor back to working condition.

However, you probably already tried that, but if not it's worth trying. Sadly you will want to get some alternative answering system in place.. maybe just voicemail on the line in question? Anything that is tape based is far less reliable than a true voice mail digital answering system...

Let me know, hopefully a reset of the system as indicated will help.

Tim

The RADF (Reverse Automatic Document Feeder) on your Samsung 6322dn printer is not working and it is not detected by the machine. Here are a few possible solutions:

• Make sure that the RADF is properly connected to the printer. The connector you mentioned is a VGA connector, but it could be a different type of connector depending on the model. Make sure that the connector is securely plugged in and that there are no loose connections.
• Check the status of the RADF in the printer's menu. Some printers have a setting that allows you to enable or disable the RADF. Make sure that it is set to enable.
• Check the printer's manual or consult the manufacturer's website for troubleshooting steps specific to your printer's model.
• Verify that the RADF is not jammed. Open the RADF and check for any paper or debris that may be blocking the paper path.
• Check if the RADF's pick-up roller is not dirty or worn out. The pick-up roller is responsible for picking up paper from the RADF's tray and feed it to the printer. If it is dirty or worn out it may cause paper jams or feed issues.
• Check the printer's firmware version, if it is outdated, try updating it to the latest version.
• If none of the above solutions work, it is best to contact a technician or the manufacturer's technical support for further assistance. They will be able to provide more specific instructions for your specific model and can guide you through the process of finding and fixing the problem.

If your Samsung ML-1660 laser printer is displaying a solid red light and an error message, it could be due to a problem with the printer itself or an issue with the communication between the printer and your computer. Here are a few troubleshooting steps you can try to resolve the issue:

1. Make sure that the printer is properly connected to your computer and powered on. Check the power cord and any cables to ensure that they are securely plugged in and not damaged.
2. Check for any error messages on the printer control panel or display screen. These messages may provide more information about the issue and suggest a possible solution.
3. Check the printer driver and software on your computer to ensure that they are up to date. You may be able to find updated drivers and software on the Samsung website or through the manufacturer's support resources.
4. Reset the printer by unplugging it from the power source, waiting a few minutes, and then plugging it back in. This can sometimes resolve communication issues between the printer and your computer.
5. Check for any paper jams or other obstructions inside the printer. Make sure that there are no sheets of paper stuck inside the printer, and remove any debris or foreign objects that you may find.

If none of these steps resolve the issue, it is possible that the printer may require professional service or repair. In this case, you may want to contact Samsung support or a printer repair service for further assistance.

Question edited for clarity, spelling of maker and typos. Question moved to correct category. If it says there is a paper jam, there is usually a small piece of torn paper over a sensor. Remove toner cartridge, open all access doors and check with a flashlight. For the toner message, tap the cartridge to settle any toner that is stuck.

This is usually done in the print settings on your computer/laptop. When you click the "Print" button there will be options there or in the "Advanced Settings" area for DUPLEX Printing. Also check it is set to 'Long Edge Binding' or it could print the page the wrong way around.

we have solution for all model of samsung printers
ML 1640/2240/2245/1911/2525/2526/1660/1665/2580/2850
SCX 4300/3200/4824/4828/4600/4623F/4623FN ETC
CLP 315/320/310/325 ETC
[email protected]

https://www.manualslib.com/manual/316508/Samsung-Ml-1710p.html?page=113 ,,this should help you

Hi, please restart your printer and double check that the printer has enough paper. If you're sending test prints from a computer, please try to do so from the printer directly (and vice versa). You can also restart your computer. Otheriwise, you might have to uninstall and then reinstall your printer on your computer. Thank you.

Try recharging the battery. If the lens still sticks, press the Play button on the back of the camera, which should ...

have you tried reloading the the print drivers and cleared the memory.

Software updates with detect none genuine, or refilled toner cartridges. The first link has some ideas. https://www.google.com/search?q=Samsung+M3320+printer+toner+not+compatible ..

menu #1934 menu

Hi please give more info. David

It normal for a condensor unit of a refrigerator to get hot and they can get as hot as 148 C.