20 Most Recent
Cyberhome CH-DVD 300 DVD Player - Page 3 Questions & Answers
Dvd stud can not open
this happened to my computer,so I took a small flat headedvscrew driver and after lifting the flap I gingerly put the screw driver into the edge and with a lil tug it pulled right out, one prob is you may have is damping disk inside you need to get under it,sometimes there is a lil hole and insert the end of a paperclip and pop it opens only way I know other then taking the case apart you'd gain access that way unplugged doing any ofvthese
DVD stopped playing all DVDs
Reset you player by doing the following:
With the player on, hooked properly to your television, and on the correct station:
Open the tray
Close the tray (with no DVD inserted)
Hold the stop button down for a full 5 seconds
The CyberHome screen should appear. You should be able to play your dvd's now.
I need a code
Most codes before changing come default as 0000 or 1234. Its only a stab in the dark, but maybe it works
Not finding what you are looking for?