Casio Wave Ceptor WV57HA-1AV Wrist Watch - Answered Questions & Fixed issues
Reset itslelf. WIll not display correct time, day, or year
My Casio wave ceptor keep resetting itself like this when the bottom right (D button) is pressed. I need to make sure I reset the city code or before trying to receive as it defaults to Tokyo. Press & hold the top left (A button) and date changes to city code. Scrole through codes using right bottons.
Hope this helps.
Nick
4/10/2022 6:42:47 AM •
Casio Wave...
•
Answered
on Apr 10, 2022
•
14,405 views
I am going to Moscw
You can change the location by pressing the mode button until you reach the city setting and then use the button at 4 o'clock to change the city until you reach the abbreviation for Moscow (MSW I think -it should be obvious if the watch it showing the correct local time.
Then press the mode button to return to normal time keeping mode.
Enjoy your trip!
4/2/2019 7:48:06 AM •
Casio Wave...
•
Answered
on Apr 02, 2019
•
238 views
Casio waveceptor watch, how do i reset it
mcdevito75 here, 1 of the buttons should say MODE, press this button and see the display blinking, NOW! press the set button for each function, after each function is set press MODE to move onto the next function, when all functions are set, press MODE again to see steady display.
11/15/2015 1:37:36 PM •
Casio Wave...
•
Answered
on Nov 15, 2015
•
5,337 views
How to replace the battery?
I take mine to a watch dealer to get the right, freshest battery from someone with the right tools to install it. Peace of mind.
3/3/2015 12:21:12 AM •
Casio Wave...
•
Answered
on Mar 03, 2015
•
245 views
I have a 3054. About
This same problem (watch resetting to 1/1/205) has happened to me 2x now, about 2 months or so apart.
I have had this watch for ~10+ years now, and works perfectly.
I have replaced the battery 2x.
Again, the watch works great.
I just realized that in the .pdf manual, there is no indication for a "low-battery" condition.
I am guessing that the "low-battery" is what is causing the watch to reset the date/time to 1/1/2005.
Any others having this same problem if this watch resetting to 1/1/2005 after the watch has run just great (auto time syncing, etc.)?
This watch Keeps great time!
Buster Brown
12/30/2014 10:53:54 PM •
Casio Wave...
•
Answered
on Dec 30, 2014
•
1,001 views
How do I receive signal from ft Collins
The Casio wave scepter watches often got put on sale because the booklet was thick and the sales staff inside their steel shell stores could never prove how it worked. I bought 3 from Sears at a low price.
Ok, I am in northern ontario, and I set the watch around a non metal tube or box - like a paper towel roll or small pop bottle and set it on a south or west facing window ledge. Works best on a top floor. Position the watch so the 12 is pointing to Fort collins.
My casio at this distance doesn't pick up the radio signal until sometime between midnight and 6 am. It has a setting that reveals if it did sync and reset the time, and will show at what time it sync'ed.
casio watch manuals are available online. As long as you have set what time zone you are in, it will set the time.
12/11/2014 1:18:23 AM •
Casio Wave...
•
Answered
on Dec 11, 2014
•
361 views
Why does my autolight on gshock doesnt work
Read the manual that came with the watch.
The battery could be too low. Try it in complete darkness (closet) and see if there is any glow at all.
Make sure you are pressing the correct button.
6/25/2014 1:46:49 PM •
Casio Wave...
•
Answered
on Jun 25, 2014
•
238 views
Waveceptor reset
I have a number of these Casio and Citizen watches. This watch does not use GPS for the time keeping. It uses a land based broadcast time signal. There is public information about where the signals come from for your area. The technical breakdown of the time code signal is public access information.
The instruction manual of the watch has the information about when your watch should automatically receive the time signal, and how to set up the watch. Many of the manuals also included a map showing the time signal coverage, and includes the time of day information to show when the signal is strongest.
Make sure the watch settings are for your time zone. This is important. If the main time zone is not for your area it will be trying to receive the signal at the wrong frequency at the wrong time of day. There are areas where the signal may not be able to be received. You can get the mapping for this from the service that the watch has been set to use.
In North America the auto time receive is supposed to take place between midnight 00:00 to 04:00. In the eastern part of North America the reception is poor compared to central and western part of North America. Check the instruction manual for your watch for details.
Below is the spec listing of your watch.
- Atomic Timekeeping
Receives time calibration radio signals which keep the displayed time accurate
Auto receive function (3 times per day)
Manual receive function
Signal: WWVB, UK MSF Frequency: 60kHz
- 50M Water Resistant
- EL Backlight with Afterglow
- World Time
29 times zones (30 cities), city code display, daylight saving auto/on/off
- Date Alert
Display flashes when set date is reached
- 4 Daily Alarms and 1 Snooze Alarm
- 1/100 second digital stopwatch
Measuring capacity: 99:59'59.99"
Measuring modes: Elapsed time, lap time, split time, 1st-2nd place times
- Hourly Time Signal
- Auto Calendar (pre-programmed until the year 2039)
- 12/24 Hour Formats
- Accuracy: +/-20 seconds per month (with no signal calibration)
- Battery CR1620
- Approx. battery life: 2 years
- Module 2556
Size of case / total weight
WV57 47.0 x 39.0 x 12.5mm / 44g
WV57HD 47.0 x 39.0 x 12.5mm / 89g
5/19/2014 6:53:11 PM •
Casio Wave...
•
Answered
on May 19, 2014
•
658 views
My Casio Wave Ceptor 3054
My Wave Ceptor also reset to 01/01/05 four days ago. I've had it for more than a year and this is the first time it's happened. It hasn't reset with automatic updates and I can't get it to manually update.
5/4/2014 4:54:12 PM •
Casio Wave...
•
Answered
on May 04, 2014
•
2,351 views
12 hours ahead
I think you have the wrong time zone selected. Some zones are 30 min. off the rest. just in case
Instruction book page E-23. To turn auto receive on or off. In Timekeeping mode press D (Lower right) to display last Signal screen. It should say GET at the bottom and show the last time it updated. (Or ERR) Hold down A until the receiving indicator and current auto receive setting (ON or OFF) start to flash. Press D to toggle auto receive on. A again to end.
If you tried to make it receive manually this will be turned off. If the GET screen said ERR then it did not update and auto receive would still be off. I had to do the manual thing about 20 times before it updated. A upper left C lower left D lower right A upper right (light)
12/21/2013 3:55:34 PM •
Casio Wave...
•
Answered
on Dec 21, 2013
•
221 views
My Casio wave ceptor EQW-M100D has started to show
Instruction book page E-23. To turn auto receive on or off. In Timekeeping mode press D (Lower right) to display last Signal screen. It should say GET at the bottom and show the last time it updated. (Or ERR) Hold down A until the receiving indicator and current auto receive setting (ON or OFF) start to flash. Press D to toggle auto receive on. A again to end.
If you tried to make it receive manually this will be turned off. If the GET screen said ERR then it did not update and auto receive would still be off. I had to do the manual thing about 20 times before it updated. A upper left C lower left D lower right A upper right (light)
12/21/2013 6:05:00 AM •
Casio Wave...
•
Answered
on Dec 21, 2013
•
437 views
12 hours early
Try this:-
First set the watch to 24 hour format rather than 12 hour format.
12/20/2013 3:32:15 PM •
Casio Wave...
•
Answered
on Dec 20, 2013
•
493 views
Will not receive signal
If you are in the US or Canada the signal is coming from Fort-Collins, Colorado. If you are too far or there are atmospheric perturbations along the way, at the times the watch is in automatic receive , the watch may not receive a strong enough signal to synchronize itself with the atomic clock signal. The watch is not always able to do so.Read the manual where it is suggested that you put the watch on a window sill, the dial facing outward with 12 at the bottom. Do not move the watch when it is trying to receive a signal. If you have a signal strength meter, orient the watch so that the signal is as high as possible.
10/1/2013 1:33:14 AM •
Casio Wave...
•
Answered
on Oct 01, 2013
•
661 views
Not finding what you are looking for?