Top 20 Konica Minolta Magicolor 1600W Laser Printer Questions & Answers

Question edited for full 'make model (what it is)'. Question moved to make model category. See if there is a broken piece sitting in the bottom of the machine. It is small enough that you can turn it upside down and shake it. All machines have some type of guide rail and a positive lock at the end. https://www.google.com/search?q=1600w+printer+toner+cartridge+loose ..

Hi Steve.There should be an 800 number in your manual that you can call and talk to technical support. They should be able to help you over the phone... You may have to press certain buttons to reset it. Hope this helps.

Does this happen with different files and different programs pdf/word doc. email web pages etc. ? try this web site Self Help Product Support Konica Minolta Business Solutions Inc Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

What reset chip are talking about. Image units? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Scanning issue ? or printing does machine print test ok and copy ok? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try this site Self Help Product Support Konica Minolta Business Solutions Inc Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

will require a tech How did the tissue paper get in there had to ask:) Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The quickest and most painless way is to go to your "Control Panel" and select "Add & Remove Programs" and scroll down and find every driver that pertains to that printer and delete it. You are stuck in a repeat cycle and the quickest and easiest way to get rid of it is just clear everything out of your printer and reload it. I realize this may take quite a bit of time but how long have you been fooling with it already? If you try to clear just that file you are sure enough going to spend some time on it and with no guarantees. You've probably got a lot of malware and ad-ware built up in the files anyway. If you don't have the CD to reload it as you already know you can download them from the internet. Get the manufactures download for the 'EXACT' model. Look closely at your printer for any little hidden or almost hidden little letters following the model #. For instance I have a HP OfficeJet 650 E709n, there is also one that looks exactly like that ends with E709e, and I downloaded the drives for the latter once and had a heck of a time with it. Just a little note of caution that might save you a big headache. Back to the download, if the printer is not in warranty they are probably going to try and charge you for a down load. Look real close they all have a free download but sometimes you have to raise up a rock to find it. Once it's downloaded it should be back to normal and even if you do have the CD to load it, it still might not be a bad idea to go to the vendors site for a download because usually they have an upgraded version of the CD that you have so you get extra software which most of the times makes it run faster and just better all around. I've encountered the same problem that you're having on numerous occasions and through trial and error (mostly error) I have learned not to mess with it just sweep the floor and put down a new rug. dhgill1949

You can't rotate the toner cartridges manually without potentially damaging the printer. To get the cartridges to rotate, close the door and go through the following sequence:

- Press Menu Select to get to the main menu
- Go to the Print Menu
- Go to the Quality Menu
- Select Replace Toner
- Use the arrows to select Black
- When the display says "Black" press Menu Select
- Press it again, the display should read "Open door and replace black toner"

Now the black toner should be positioned to be replaced, and you should be good to go!

Have you checked the toner cartridge.? as this will prevent the printer from running.
Have you checked the laser drum..? This will also stop printing.
If the drum has failed or used up its running time, you will need to replace the drum and have the internal counter reset. This may require a service person to call over and fit the new drum resetting the counter as well..
Have you tried checking the printers software installed on the system to see what errors it may give you. Most printer software has inbuilt diagnostics which will tell you what the issue may be..

What is the provlam?

CONTACT kONICA MINOLA Websitehttp://www.biz.konicaminolta.com/inquiry/index.html?rellink=sidenavi

Self Help Product Support Konica Minolta Business Solutions Inc try this web site for correct drivers Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The papaer size it is correct in the printer properties? Or the tray selected is good? Put them on auto

Yes, as long it did not get wet or used( reached its copy life).

Self Help Product Support Konica Minolta Business Solutions Inc try this site Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

NO. They do not allow that is how they make their profit. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Your consumables may need replacing

The transfer roller is the sponge looking roller at ea. Replacing the transfer belt mite also be a good idea.ch end of the roller should be clips allowing it to be removed Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f