20 Most Recent Robotoolz SelfLeveling Laser Level with Remote Control RoboLaser Questions & Answers

ROBOTOOLZ. INC.

ROBOTOOLZ. INC. was a corporation registered in the state of California.

It was a domestic corporation, meaning it was formed, as well as registered, in California. Its articles of incorporation were filed on June 18, 1998.

All of ROBOTOOLZ. INC.'s powers, rights and privileges in the State of California have been suspended. This could have happened because they failed to file a return and/or pay taxes to the California Franchise Tax Board, or because they failed to make certain informational filings with the California Secretary of State. The specific reason for this suspension can be found by ordering a status report from the Secretary of State.

ROBOTOOLZ. INC. was a for-profit entity.
Sorry, looks like you are too late! Mailing Address

670 White Plains Road
Scarsdale NY 10583
President

Abbott Stillman
670 White Plains Road
Scarsdale NY 10583
Registered Agent

Gary Adams
611 Iris Ave 41
Sunnyvale CA 94086

make sure batteries are tight in unit ,making good connection there are many internal things that could be wrong no rotation could be bad drive motor broken belt bad pcb robotoolz now owned by bosch who owns cst-berger discontinued robotoolz lasers there is a guy who will give free estimate on repair A.P. Service & supplies 610-944 8030

If you've replaced the batteries in your Robotoolz laser level but it still won't turn on and the swivel mechanism isn't functioning, there could be a few potential issues causing the problem. Here are some suggestions to troubleshoot the issue: 1. **Battery Polarity:** Double-check that you've inserted the batteries with the correct polarity (+ and -) as indicated on the device. Sometimes, incorrect battery placement can prevent the device from turning on. 2. **Battery Contacts:** Ensure that the battery contacts are clean and free from corrosion. Use a clean cloth or a cotton swab to clean the contacts in the battery compartment. 3. **Battery Compartment Door:** Make sure the battery compartment door is securely closed and latched. Some devices have safety switches that prevent operation when the door is not properly closed. 4. **Reset:** Some laser levels have a reset button or procedure. Check the user manual for your specific model to see if there's a reset function you can try. 5. **Calibration:** Some laser levels require calibration before they can operate. Refer to the user manual to see if your laser level requires calibration and follow the provided instructions. 6. **Electrical Issues:** If the laser level was exposed to moisture or extreme conditions, it's possible that internal electrical components might have been damaged. In such cases, professional repair might be necessary. 7. **Mechanical Issues:** If the swivel mechanism isn't functioning, it could indicate a mechanical issue. Check for any obstructions or debris that might be preventing the swivel movement. 8. **Professional Inspection:** If you've tried the above steps and the laser level still won't turn on or function properly, it might be best to seek professional assistance. There could be internal components that need repair or replacement. 9. **Manufacturer Support:** Contact the manufacturer's customer support for guidance. They might be able to provide specific troubleshooting steps or recommend a repair service. Keep in mind that laser levels are precision instruments, and improper handling or disassembly could lead to further damage. If you're not comfortable troubleshooting or repairing the laser level yourself, it's best to seek professional help to avoid causing more harm to the device.

Ask here if they will look at it? https://www.tek.com/en/calibration-by-manufacturer/robotoolz Some videos that may help. https://www.google.com/search?q=robotoolz+laser+level+repair ..

Normal repair of a 9-volt terminal is to salvage the top of a dead 9-volt battery. Do not use a good 9-volt as they are prone to dangerous expansion if shorted. Take the salvaged battery top and add short red and black leads with a soldering gun/pencil. Use rosin core solder only, not acid core or solid. Replace the damaged terminal using above by connecting the short leads to the original terminals or circuit board traces.

http://www.microprecision.com/instrument/ROBOTOOLZ-RB01001%20-CALIBRATION.html This would be a professional calibration to many known standards. I hope this helps you out. Thanks for visiting and leave feedback! I'm a newbie

Open it up and clean the battery acid from all areas!

if you go any where and your not playing your game before you go unplug your console