20 Most Recent Sony Cyber-shot DSC-WX1 Digital Camera - Page 2 Questions & Answers

the motor that drives the lens must be faulty, since its new u can get it exchanged at the sony showroom or service center without any problem

I believe you are looking for a USB transfer cable for your Sony Cybershot N50. I found a replacement USB camera transfer data sync charging cable cord for Sony Cybershot Cyber-Shot DSCH200, DSCH300, DSCW370, DSCW800, DSCW830, DSC-H200, DSC-H300, DSC-W370, DSC-W800, DSC-W830 digital camera on Amazon . This cable is compatible with several Sony Cybershot models, including the N50. The cable is priced at $7.95 and comes with a 30-day return policy. Amazon.com: Replacement USB Camera Transfer Data Sync Charging Cable Cord for Sony Cybershot Cyber-Shot DSCH200, DSCH300,DSCW370,DSCW800,DSCW830,DSC-H200,DSC-H300,DSC-W370,DSC-W800,DSC-W830 Digital Camera (Black) : Electronics

copy and paste https://www.manualslib.com/products/Sony-Srp-F300-4070606.html

An error -13.01 is a "disk read error". See Page 7 of service manual how to correct the problem. Sony MVC-FD83 Service Manual (Page 7 of 113) ' ManualsLib

Check the charger and it's cable and confirm it is providing power for charging ? Make sure the connectors are clean and dust / rust free. For further help, see trouble shooting section of user manual Help Guide ' Top (sony.com)

Question edited for clarity and add CAPS. You will need to take it to a Sony Service Centre. You may need a drive motor and only they can provide it. It is a good camera and worth repairing. https://www.google.com/search?q=sony+mavica+service+center ..

The Sony DCR-PC100 is a camcorder model that was released before touch screen interfaces and language settings became more common on consumer electronics. As such, it's possible that this specific model might not have a built-in option to change the language from Japanese to English, especially if it was originally sold for the Japanese market. However, there are a few general steps you can try that might help:

1. System Menu: Check the camcorder's settings menu for any language-related options. Look for a "System" or "Language" menu where you might be able to change the language settings. Keep in mind that the menu options might still be displayed in Japanese, so you might need to rely on symbols or context.
2. Reset to Defaults: Some devices have a "Reset to Defaults" option that might reset all settings, including language, to the factory defaults. This might be worth trying if you're unable to find the language settings.
3. Contact Sony Support: If you're unable to find a solution through the manual or online resources, it's best to contact Sony customer support for your region. They might be able to provide specific guidance or let you know if changing the language is even possible on the DCR-PC100.
4. Third-Party Resources: Search for user forums or online communities where other users might have faced a similar issue and found a solution. Sometimes, enthusiasts or experts in those communities can provide helpful insights.
5. Professional Assistance: If all else fails, consider reaching out to a professional technician or service center that specializes in Sony camcorders. They might have experience with older models and could potentially assist you.

This video shows they have a problem with latches. There isn't much on it, so a Sony Camera Repair Centre is probably the best solution. https://www.google.com/search?q=Sony+DSC+S700+camera.+can%27t+open+battery+compartment ..

You could try doing a factory reset, it should not ship in demo mode. Follow the picture below.

If you have already cleaned the lens gears and the issue persists, it is possible that the lens electric motor is not working properly. You can try resetting the camera to see if it helps. Here are the steps to reset the Sony DSC-S40:

1. Turn off the camera and remove the batteries.
2. Wait for a few minutes before reinserting the batteries.
3. Turn on the camera and see if it works.

If the camera still does not work, it may be a hardware issue and you may need to take it to a professional repair service or contact Sony support for further assistance.

I have the same issue. I tried unlocking it. It doesn't go in, and I'm using the same SD card I had inserted before. There's nothing broken inside the slot. I need help...

No you are stuck with that date. It is encoded and added to the footage in real time.

They need the batteries in them for all functions and generally there are two. One is the main battery that you recharge and can swap out if you do a lot of filming. The second one is a small coin cell that holds the memory when the main battery is removed. It is the same as the CMOS battery in a computer. Both batteries need to be inside the Camcorder and charged. https://www.google.com/search?q=Sony+Handycam+DCR-DVD+610 ..

Google the Japanese symbol for Language. Enter the main menu, find that symbol and select it.

Question edited for clarity. What is the object for, logo, lines? Is this on the screen on the back of the camera? If it is, check the manual settings. https://www.google.com/search?q=sony+cyber+shot+dsc+w55+manual ..

More detail would assist us in formulating a reply that will solve the issue at which you have hinted.

Hi its batter to replace from a authorized service center thanks M Nasir