20 Most Recent Kenmore 24032\24036 Top Load Washer - Page 6 Questions & Answers

Kenmore 24032 24036 Top Load Washer Blinking lid lock light YouTube

Look in the manual, how to remove the filter. But be aware the filter opening is very low and there must be tons of water in the machine. So be put correct tooling ready. Some buckets, and low trays.

You may be able to find the problem by looking at the illustrated parts breakdown. Sears maintains such drawing on nearly all of the brand names they sell and many more: http://www.searspartsdirect.com/partsdirect/ Enter your model number in the provided search window there. There are also links on how to find the model number if you have trouble locating it.

Use this liquor call awesome Fr 99 Cent Store best thing in The world

• Does Your machine have a little switch button activated by the top door? (You can hear it click as you open and close the door.). If that switch is not working, the control click can not let the machine advance to the next step in the cycle.
• Let US know what you find. M B

if you have a regular top load direct drive washer and if the tub is tilted off balance remove the frame of the washer,look at the back bottom of the frame,there's a spring that is connected to the bottom of the frame and hooks the the back of the tub,sometimes the frame rusts out and the spring rips through the drill hole in the frame,you have to drill a new hole in the frame and reconnect the spring.i've never seen a balance ring damaged.so this is the first thing i would check if washer is off balance. https://www.youtube.com/watch?v=tbBnr4aCGjc

Hi, Consumer. We're sorry to hear about the difficulty with your washer. Below are links to our Use & Care guides, Parts Diagrams, Troubleshooting information and the Service are of our website. We hope this helps! http://bit.ly/112Lu7q

This is almost always caused by a bad time. The solution is to replace the timer. What happens is the timer has a small motor on it that turns the timer, if the motor burns out or the timer gears wear the timer doesn't advance like it should.

use a rubber carpet to place the washer