20 Most Recent
Texas Instruments TI-83 Plus Calculator - Page 4 Questions & Answers
My ti-83 stop changing decimals to fraction
The Frac command only works if the number can be expressed as a fraction with no more than three digits in the denominator. Since the square root of 5/9 is an irrational number, it cannot be expressed as a fraction at all. The calculator is telling you that the value cannot be adequately approximated as a fraction with three or fewer digits in the denominator.
11/7/2014 5:31:59 PM •
Texas...
•
Answered
on Nov 07, 2014
My ti-83 stop changing decimals to fraction
The Frac command only works if the number can be expressed as a fraction with no more than three digits in the denominator. Since the square root of 5/9 is an irrational number, it cannot be expressed as a fraction at all. The calculator is telling you that the value cannot be adequately approximated as a fraction with three or fewer digits in the denominator.
11/7/2014 4:45:45 PM •
Texas...
•
Answered
on Nov 07, 2014
Err:invalid dim while trying to
You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.
9/19/2014 5:58:00 AM •
Texas...
•
Answered
on Sep 19, 2014
Factoring on the ti-83
Natively it is unable to factor out polynomials. It does not have a CAS (Computer Algebra System). You may have confused it with some other CAS-enabled calculator.
8/29/2014 12:08:19 AM •
Texas...
•
Answered
on Aug 29, 2014
Graph feature is not working on TI-83
you have one of your stat plots on that is what is messing it up. So either turn off the stat plots. Or just reset your calculator. hit 2nd then the plus (+) key then 7 then 1 then 2. Good luck
8/26/2014 10:07:49 PM •
Texas...
•
Answered
on Aug 26, 2014
Replaced 4 AAA batteries AND NOW THE SCREEN IS ALL DARK
Hello; TI is not my favorite. The calcylater is for keeping tabs on yjr number of batteries used in a given time. Kidding!. Make sure,you probably alreay have, the batteries are installed correctly. No offense, It happens. The negative (flat) of the battery always goes against the spring contact. As you put the batts in, rotate each one several times to ensure it is seated and making good contac. Make sure the device is off when messing with the batteries.all batteries should be new or at least in same condition. If there is a bad one it will try to balabce and affect the others.. Look for a reset pinhole, Usual place is on the back. A small paper clip placed in this hole and press until a ckick will may be the need. Doesn't take much pressure so take care not to Gorrila the thing. _Good Luck-Ned-
7/31/2014 1:16:13 AM •
Texas...
•
Answered
on Jul 31, 2014
343 grams = ? oz
343 grams is about 12.10 avoirdupois ounces or about 11.03 troy ounces.
7/28/2014 4:29:41 PM •
Texas...
•
Answered
on Jul 28, 2014
How many grams in 15 ounces
That depends on what you mean by "ounce."
15 avoirdupois ounces is about 425 grams. 15 troy ounces is about 467 grams.
7/24/2014 6:53:54 AM •
Texas...
•
Answered
on Jul 24, 2014
Fix err invalid dim
You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.
7/24/2014 6:52:10 AM •
Texas...
•
Answered
on Jul 24, 2014
Not finding what you are looking for?