Top 20 Konica Minolta magicolor 1690MF All-In-One Laser Printer Questions & Answers

If it got jammed in the fuser unit (the hot part) the fuser can come out as a unit then remove the media wad

Fuser problem

May be your transfer roller which would sit right under your toner, but before replacing that it could also be a dirty lens on your laser asm. That would be right above your toner.

Fuser warm-up failure • The thermistor /1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.

The part number is actually A0HFPP4403 or A0HFPP4400. pretty pricey for what it is. $55 here KM MC1680MF Hinge ADF Left

For what color? Replace the image cart associated with color asking for mite have a bad I/c. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Place thick paper and push it manually while rotating the rollers in that way the small paper jam remain inside will comeout.

replace the print head. That's the part that houses the LASER. try this site for the part Precision Roller Printer Toner Cartridges Parts and Supplies Office... if not try local Konica Minolta dealer Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Everything you checked sound good. Might be printer software problem, and needs to be re-flashed. Software only available from secure web site that a technician would have, see what it cost if to much buy a new one with extra bells and whistles ! Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

well model number would help Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The bright light that reads the image of the original document is bad replace it. comes as the scanner try this site for start Precision Roller Printer Toner Cartridges Parts and Supplies Office... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

You can download the manual from this link but it sounds like a fuser problem. Not cheap !

look the toner cartridge are misplaced sure 100%

depending on the sound fuser or laser

Modem option is not working. Have a tech look at it. The FAX board might be bad, check you phone line also call ATT. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Fax board is broken!

There is a "change ink" in your menu settings that will bring the printer head to the correct position for swapping cartridges.

You need to reset the machine, the new fuser does not reset the machine. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Ozone Filter Fan is bad or not turning due to DUST or dirt remove all covers and clean all filters and fans Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

as I said before the new fuser does not reset the machine must be done by yoiu Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f