20 Most Recent Haier Freezer HUF168PA 16.8 Cu. Ft. Upright Freezer Questions & Answers

there is a loose connection at the rear of the freezer near or around the compressor unit , i strongly advise you to get a professional to look it.Regards

Haier are a bad brand, the unit has cooling fin frost up and will not allow air to pass through the cooling plates, defrost the unit for 2 days with door open and restart, if all good after that, keep doing it, if not, its lost gas and needs the bin. Quality items deliver lengthy trouble free operation, sorry but I put Haier in the Daewoo class, Kelvinator or Westinghouse next time, its worth that little extra. Regards Russ

Hi,
The thermostat is bad....
You will need to replace that t-stat..

That is not that hard to fix and you can easilybuy the parts yourself online...

Here is a tip that will help you with the online buying...

How to Buy Appliance Parts Online

Here is one site that I recommend http://ping.fm/zJDAM
heatman101

ur overload chip is triggering, check r134 charge , or start relay, and condeser, otherwise ur compressor might be damage..

it often works to warm the seal with a hairdryer and reshape it

you search on net.

You can try resetting it by unplugging it for 10 minutes.

The Ed error code is referring to the defrost heating system.

probably a fault in that switch

https://www.haierappliances.com/support/freezers try this web site and contact the manufacturer directly. They also have manuals. just surf their site.

https://www.haierappliances.com/support/freezers/troubleshooting try this web site for direct answers from the manufacturer.

https://www.haierappliances.com/support try this site to ask you question directly to the manufacturer.

If compressor isn’t running, it’s either a thermostat / control board problem, or a power supply problem.

If compressor isn’t running, it’s probably a thermostat problem

https://www.manualslib.com/brand/haier/freezer.html Identify the model and free manuals online at the link shown. Haier Freezer manuals

see if this link helps you out. how to get wedge drawer open Google Search

Looks like an 18cuft