2003 Yamaha YZ 125 "clutch bite" Questions

...clutch at that point. Remove the cover screws (count the turns) and start pulling disks and metal plates out of the hub--keep track of the order of removal. You need to replace only the cork faced ...

...clutch plates and friction plates housed,, undo the 7 or 8 spring loaded bolts carefully take the first fibre plate out then metal friction plate then another fibre plate and so on,, wen u take the ...

Biting point on clutch lever is right at the end Is there any way to adjust clutch leaver on hydraulic clutch as my biting point seem right at the top end as u release the leaver find your master cyl.

clutch bite point has moved so its almost back to the handlebar. Any idea of what I have done! Thanks Steve I will agree with Brock,system just needs bled to actuate clutch properly.Use the means that

...bite point of the clutch has moved from mid travel on the handle to almost the end of the travel There must be an adjustment to change the bite point. There is she'll on the handle bar and a ...

Clutch problems Suzuki RM125 I have a Suzuki RM125 2000 model and have a problem with the clutch. When I pull clutch out to biting point I have to give loads of high revs in order for it to go. Can't ...

Clutch bite is too far away from handlebar The biting point on my clutch cannot be felt until the lever is around three quarters of the way out. I have tried other bikes and found that it is alot ...

clutch lever out slowly do you feel it begin to bite. If not readjust the cable as per the user manual then try again. If you can feel the bite when pushing try again with the engine running. If still

2001 ZR1. Broke clutch cable. Why doesn't clutch disengage? ok i'll bite --broke clutch cable Havbu purchased a serviceguide for that bike yet ....of corsenot

Clutch bite very late adjust the cable shorter. On the side that goes into the engine there should be a adjustment screw. If that doesn't work because it is already at its shortest length then you ...