1992 kawasaki ZZR 400 "remove seat" Questions

...Remove the idle screw and the air screw on the outside throat of the carb and spray into the screw holes as well. < < READ CLOSELY > > Be sure to put these two screws back in the same hole they came ...

Cannot start not using the choke and rpm flattens at 4000 rpm I have a 1997 Kawasaki ZR 400. Previously when I used to ride it I noticed that RPM flattens at 3500 rpm for a few seconds and ramps up ...

...seat remove the passenger seat and seat mounting fasteners. When installing the seat insert the tang at the front of the seat into the channel in the frame and install the seat mounting nuts, then ...

...remove the riders seat? do the rider and passenger seat come off together? have removed 4 nuts under fender but seat won't budge In the 1994 Honda VT 600, also known as the Honda Shadow VLX 600, the ...

...the front area of the forward seat each side remove the 2 bolts lift the seat and forward to remove,then you will see 2 more bolts for the rear seat remove them slide the seat forward and remove

...behind the passenger seat is the key to removing the seat assembly. If you remove the bolt, then pull the seat upward and back to remove the whole seat. the battery is just under the front seat. ...

...Remove the seat by lifting it up and back 2- Remove the front (driver's) seat). Remove the two bolts behind it and remove the seat by lifting it up and back. 3- Removing the seats will give you ...

...remove the seat? Any advice? is this just the seat itself or the seat cover? if its the seat assembly there should be 2 bolts holding the seat down located somewhere around the rear of the seat aprox ...

...remove seat? Thanks There is no kick starter available for your model. To remove the rear seat , remove the screw at the back of the seat and lift the back and pull the seat toward the rear of the ...

seat - remove them they require a large hex head driver (if the seat is a 2 pc seat -remove the rear section first) go to the rear fender center and remove the single bolt there securing the rear seat