1992 kawasaki ZZR 400 "ignition pickup coil" Questions

...ignition coil on left rear. i changed the yellow wire from the right rear coil to the left coil and i get lots of spark, but i don't get any spark with the orange wire. what do i check next? need a ...

...pickup coil, ignition coil and cdi box. the ignition switch can be tested with a test light and the kill switch should not be grounded unless activated. (hook a test light up to the positive side of ...

...pickup module); CDI unit; Ignition coil; Spark ... to check for voltage at the two primary wires of the ignition coil. Trouble Shooter Guide for NO-SPARK Chinese Engines www.kazumaracing.com > ... > ...

...ignition(source coil, pickup coil,. Usually takes a professional with the proper tools to diagnose ignition system problems!! Check titeness of batt cables. Test it also..mustread 12.6v no less. ...

...ignition coil is bad,or B: the pickup on the stator rotor is bad or the rotor could be rusted on the raised portion where the pickup get its signal. Hey, I am Shishir Varde, as you say no spark in ...

...ignition on and kill switch set to run each coil should have a live feed to one input, the other is the switching wire from the igniter. So firstly check for a 12v live at the coil. Then swap the ...

...ignition drained battery charged battery fully put it back in still wont start but it is backfiring sounds like you might have burnt coil, also you may have to replace stator pickup coil,also you may ...

...be the same colour for each coil. The other wire will be a different colour for each coil. Match the colour wire with the pickup inside the ignition cover. These pickups are usually marked 1-4 or ...

...ignition on and kill switch set to run each coil should have a live feed to one input, the other is the switching wire from the igniter. So firstly check for a 12v live at the coil. Then swap the ...