Frigidaire GLGH1642DS Front Load Stacked Washer / Dryer "washing machine drum off track" Questions

...track Drum off track It may be a suspension spring has come off or leg has broken if it is both drums off track.If it's just the inner drum then the bearings may have failed or the spider that the ...

...track Your drum has disconnected from the rail in the dryer. Sometime a bolt can work its way out and the drun can get off track. Remove back of dryer and see if you can get the drum on its track and ...

washer drum feels like its "off track" although it will wash and empty fine when it goes into spin the drum "flops" around HOUSING CONNECTED TO DRUM IS CRACKED. MADE OF WHITE METAL, CANNOT BE REPAIRED

The drum wont spin fast. clothes remain saturated and when empty the drum feels a little loose as if it fell off a track. Many different designs in washing machines. Need model #.

...washing machine. The washing machine is making a loud noise while spinning then especially if it is either a clanking or scratching sound then there is some type of foreign material that could of had ...

...washing machines. mike [email protected] they dont have tracks they sought of float in the middle of the tub held on by the shaft coming off the spider arm on the back of your drum, if you can ...

...drum not turning not washing or spinning Nothing Check the belt first ,probably off the pulley ,most likely damaged but maybe good enough to at least put it back on and test the rest. A common reason ...

...drum is off its track or whatever it sits on If the machine was delivered new, has all the transit straps been removed ? If the machine was delivered without transit straps then the drum could be off ...

...machine. The drum is obviously off balance, but it will not get in balance no matter how I rearrange the clothes inside. I have a whirlpool top load washer. The drum seems to be completly off track. ...

washing machine and check that the Damper springs either side of the drum are attached and not broken or loose. Push down on the top of the drum to ensure they are both in good working order!. If