HP 5590 ScanJet Flatbed Scanner "lamp error" Questions

lamp error Cannot initialize because of lamp error, is this a hardware error. Yup! The lamps have a limited lifetime (or it could have just failed prematurely due to some other reason). For the cost ...

...lamp error" Every time I try to scan it starts, then says "lamp error" - the lamp appears to be on however --- is it worth fixing? Is this just a bulb replalcement? Can a layman do it? I had the same ...

Lamp error in HP Scanner my HP Scanjet g2410 gives lamps error when the command is given for scanning. w2hat are the technical solutions? It would cost more to replace the scanner assy than a new ...

Lamp error Hi, Lamp errors can be caused by a hardware or firmware failure within the printer. >>>>>>Make sure you have the latest firmware installed on the Everest printer. >>

...lamp error Normally this error means that your lamp will no longer come on to scan anything. The only way to fix this is to replace the bulb. If your bulb is coming on, but you still receive the ...

...because of lamp error. Does the lamp in the scanner come on at all? If not, then it is most likely bad. You can try disassembling the scanner and check that the lamp connectors are not

lamp error on my 2400. I followed the unplug and wait solution but that is not fixing the problem. Can I buy and fix the lamp myself or is thing fubar. Hello, The lamp error is usually caused by dirty

...Lamp Error "Bad or fading lamp (error -4430)" Fixable? Can I do it? Best source to purchase? From HP forums: The first thing I would do is to make sure your TMA is properly attached. Next, make sure ...

when i try to scan i get a lamp error nessage Has it work before? If it has is sounds like might the lamp bulb itself. Over a period of time they will burn out.

scanjet hp 3800 lamp error: what means? which part doesn't work? the scan lamp is defective cahnge to a new one