Konica Minolta bizhub 350 All-In-One Laser Printer "72 codes" Questions

...motor and Transfer Belt/Cleaning Unit drive components are not bound up. Replace M11 (p/n 9314 1100 72) and/or the Transfer Belt/Cleaning Unit (p/n 4049 212) as needed. IMPORTANT: If the error ...

error 72 Do you have a diagram on how to replace the Engine Control board? The error message "engine firmware" code 72 is showing up on the display. I've turned the printer off/on and error message ...

error message "engine firmware" code 72 The error message "engine firmware" code 72 is showing up on the display. I've turned the printer off/on and error message still appears. Most likley the ...

error code coo72 Your Hopper motor is not working, 72 is coming from the Toner Hopper motor....check motor check gears and check developer life,,,,,, setelah ganti drum malah ndak keluar gambar.kenapa

solution for jam code 72-18 jams in horizontal transport of finisher only when duplexing its a fs519 finisher Check the rollers and actuators.

service enter code C-0-0-C or C -Interrupt-0-Interrupt,then press 20(maintenance counter clear) and 72 maintenance preset counter setting for a new value

mfc-7340 error code 72 wont let me print, says "print unable 72" print unable error code 72

MAchine error 72 on the brother MFC 9700. this code say that Cannot detect Beam Detect signal u should call an engineer or if u wish to try ur self try replace the toner and drum. verifie cables were ...

How to repair a code 72 on a Xerox 6200 color laser printer This is an NVRAM verify error. If the fault is persistent, even after a reboot, the only solution is to replace the engine board.

Xerox phaser 6200 error message, firmware failure error 72? if you turn the machine off and turn it back on: A} error code is gone, problem solved, system just needed to refresh B} error code returns,