HP OfficeJet 7410 All-In-One InkJet Printer "scanner error" Questions

error message on the printer screen stating unable to connect to scanner device. Try turning printer off then back on again. This never cleared up the error. So i unplugged the power and USB cable and

Scanner Failure error message Can parts be purchased to fix the C6180 that gives Scanner Failure error message? You need new scanner section but try first to clean this one.Disassembly the printer and

scanner error - battery. Where is the battery located? Scanner, put your scanner settings to "Skip preview and send directly to photo view center". If I set this option then I don't get the error. Its

was installed what is the error message. if it says "scanner error" try to scan and check the scanner glass if there is a light if there is no light then the scanning mechanism is not working properly

...error scanner failure. I keep getting this error "scanner failure turn off and on again" That doesn t solve it" On the top of the scanner mechanism, there is a black tab that gets caught on the ...

...scanner failure error Hi, we keep getting this error message on our machine. We have done hard and soft reset. We have plugged the power source into the main supply. We have had the scanners and ...

Scanner error - I've plugged in, reset partial, reset semi, disassembled and cleaned bulbs (both working) and optics, moved to different outlet, checked power supply, put unit in warm room, but still ...

...error while scanning and says scanner failed..power off and restart the scanner..but the problem won't go. Any suggestion is highly apprecaited. Thanks Laxmi Bad scanner unit. Uneconomical to repair. ...

not work, did the print alignment still not working Only the printer works try use a high quality usb cable, some usb cables has low bandwith, and give some strange, errors like scanner error, copy,..

...error massage no scanner option hp officejet 4355 all in one May be your printer's scanner part does not work properly. Check Scanner Motor Clean the disk of the scanner motor. and try again If not ...