No FAX status confirmation printed. After a successful FAX completion, I do not get any status confirmation printed. Should I? If I cancel the FAX in process, I get an error confirmation printed. go ...
print (copier works). shows processing and gives two options. option 1 is to click "cancel" button and the next screen shows network and a "confirm" button (haven't gone past this screen). option 2 is
...print after five or so minutes, but creates a lag for everyone printing. I have updated the newest PCL6 drivers. Any suggestions? I think there are some softwere error in the copier hard disk, but ...
...on deep cleaning.Select the nozzles to clean and then click on execute.Click OK to confirm.The process begins when the Power lamp starts blinking.Let the process end before doing ...
...print head. *Confirm that the printer is powered on. *Open the paper output tray and top cover. Note: Gently open the paper output tray while holding it. *After confirming that the print head holder ...
Question about HP Office Equipment & Supplies
...print all bot yellow, put a red cartridge in place of yellow to confirm prinhead cleared, put in new yellow cartridge, tried printhead alignment, printer said : there was a fault with alignment ...
Question about HP Office Equipment & Supplies
...check the seating of ink cartridge. when you replaced it, it should make a little click sound confirming that the ink cartridge has seated properly. Please repeat the process once more. Also ...
Question about Toshiba Office Equipment & Supplies
...an abnormal ending, "Error" is shown. Press the [CANCEL] button to clear the error display. Next, confirm that the patch chart is oriented correctly on the platen and not at an angle, then do the ...
confirm it was the print job you wanted. Please help! Is the paper hot when you take it off the printer? The reason I am asking is, there is a part called a fuser, its the last process in the printing
Confirm the nozzle check pattern. Examine the Print Nozzle. Step 2 : Cleaning the Print Head. a) Cleaning the Print head using RESUME/CANCEL button. i) Ensure that the printer is on. ii) Hold down the
1,712 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,429 Questions
