Question about Dell Office Equipment & Supplies
...tray 1 is being used:Remove and reseat the tray. To remove and reseat the tray, perform the following steps:Pull the 250-sheet tray out of the printer until it stops. Hold the tray with both hands, ...
Question about Konica Minolta Office Equipment & Supplies
...tray 1 to tray 2? I have a hp Laser Jet 2420d and it prints from tray 1 and I want it to print from tray 2. My computer it all set for tray 2 but the printer is set up for tray 1. Hi, Browse through ...
Tray 1 for our company letterhead, and the bottom tray for plain paper. When we tell the printer to print from Tray 1 (by going into Print preferences), it seems to mostly ignore the request and print
...tray 1 located? Most Lexmark printers have two input sources. The Manual Feed Tree, located at the top back of the printer across the top of the printer. And Tray 1. Tray 1 is located under the Paper ...
Question about Konica Minolta Office Equipment & Supplies
...tray 1 to test if it still pulls from tray one and when the printer gets the job it give the alert to reinsert tray 1 and wont print until tray one is put back. I went into the printer properties and ...
Question about Konica Minolta Office Equipment & Supplies
...suggestions. Check the Paper Handling Menu. The Tray 1 size and Tray 1 Type should be set to Any Size. This means that the printer should pull the paper from Tray 1 first when paper is loaded in tray ...
...Tray 1 (because it jams in Tray 2), but I can't get the printer to pick up the paper in Tray 1. I've set the document's page setup to come from Tray 1, the printer properties to come from Tray 1, and ...
Question about Konica Minolta Office Equipment & Supplies
...tray 3. 1) When the printer receives a print job, it selects the tray by trying to match the requested paper type and size with what has been loaded in the trays. Using an ?autoselect? process, it ...
Question about Konica Minolta Office Equipment & Supplies
...TRAY 1 MODE= FIRST FIRST CASSETTE Determine how the printer will use Tray 1. FIRST: If paper is loaded in Tray 1, the printer will pull paper from that tray first. CASSETTE: A paper size must be ...
...tray 1. Where is tray 1? Hi, Kindly note that bottom Draw of the printer is the Tray 1. If the printer says Jam in Tray 1, kindly check if there is any paper struck in the printer. Remove the Paper ...
14 questions posted
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions