Konica Minolta Bizhub C552 Copier "door open close toner" Questions

...door and open the top door, remove the photo conductor. When the front door is closed, you can turn the toner trommel and move it so that the second toner gets in the remove position. Open the front ...

...be a small point which the machine uses to open the shutter when you close the door. If the shutter won't open or the point is missing (Broken off) the printer door witll not close. Cheers ...

...open the front door and go to the low toner color and unlock the lever and remove the toner cartridge and then open the new toner box and remove the orange tabs and install the new toner cart ridge ...

...pulling out the drum. Leave the door open.Then open the front door. Then close it slowly. While doing this, move the carousel. The carrousel is free while the door closed and locked while it

...open the door remove the toner as you would to replace. Remove the toner bottle look inside the bell behind the green handle and check that you can see a claw type thing if you cannot remove ...

...open close front door. When the machine asks for toner install the bottle correctly, if the nubs on the bottle are damage get a new bottle those nubs are what the toner bottle motor uses to turn the ...

...door to open it. The toner bottle has a green, square plastic thumb grip on the top, front part of the bottle. Press down on this part as you pull forward. You should be able to remove the bottle and ...

...Door open or no print cartridge?. Verify that the black connecting link to the toner door hinge is properly attached. If the latch is not properly attached (Figure 1), snap the hinge in place, close ...

Open door and remove drum and toner. Hold Go button down until all lights are on. Put drum and toner back in and shut door. Another is. 1. Switch off printer 2. Switch on printer 3. Open front door 4.

...Open the toner cartridge door completely. Pull the toner cartridge tray so it extends until it stops. Verify the cartridges are in the tray correctly, adjust if necessary. Close the toner tray and ...