Konica Minolta Bizhub C552 Copier "closures" Questions

ERROR CODE F-46-8 IN MY COPIER I think you need to replace the front door interlock switch ( very common part ), and then take some time and adjust the bracket for a really good positve closure on the

door open error even thou door is closed check the door closure sensor on the main hatch, it may be clogged with paper dust or the ink cartridge may not be fully inserted causing the door the be ajar

i4300 thinks the output door is closed when it is open. Check for blockage/secure closure.

error code c2500 check the side door interlock switch. the bracket can get bent causing poor closure.

We have a Sharp AL-1642CS Copier machine. That currently isn't working. What does a CH code mean? CH code = Toner Cartridge is missing or not installed properly. In rare cases it is a defective toner ...

roland cj 70 always say cover is not close I believe that there is an optical sensor just under the lid or on its hing ,sometimes it gets out of adjustment and does not sense the lid closure.Other ...

I need a little plastic part for the door closure where the toner goes in for a Minolta Dialta This little tiny circular part holds the door shut and it will not run without the door being shut. I am ...

i have konica minolta c552 has an error C3b02 it has an error code C3b02 Hey jrf, the manual says to check, in this order; proper fuser installation, proper closure ( door latch ) of the right hand ...

Finisher door closure switch/sensor not working. Display says finisher door open. I believe I have bur cant find it online. Have you tried to turn the copier OFF and unplug the finisher and turn the ...

The machine has been idle for two years due to office closure. I started it today and everything works fine except the touchpad which looks fine and switches from copy to scan to fax. Is there a ...