Question about Konica Minolta Office Equipment & Supplies
...changing are packed with the new drum, and the belt unit is the transfer belt that also wears out and needs changing periodically. The instructions are packed with that also and not hard to
says change belt unit when turning machine off and back on, "change belt unit" appears on screen It means the transfer belt unit has reached the max print count and needs to be changed. ...
how to reset the counters of the dev unit of konica minolta c360 The developer unit has been reset automattically,after change the old unit another new.You can change the developer unit life STOP ...
Error code in konica minolta c200 p 21 Relevant parts Black PC drive main sensor (PS16) Black PC drive sub sensor (PS18) Main drive unit Printer control board (PRCB) Step Action 1 Perform the faulty ...
Question about Konica Minolta Office Equipment & Supplies
C-3721 error is displaying. How can I fix it? Fusing abnormally high temperature detection (heating side) Check the fusing unit for correct installation Check the fusing unit, PRCB and DCPU for proper
Question about Konica Minolta Office Equipment & Supplies
Reset image unit (Magenta) Konica Minolta Bizhub C352 Hello, The copier asks me to replace the imaging unit magenta. My question is: Is it there's a possibility to reset the chip or the ...
Question about Konica Minolta Office Equipment & Supplies
konica minolta bizub 164 call service c3451 tell how solve Warming-up failure1 Check the fusing unit for correct installation. 2 Check the open/close operation of the right door. 3 Check the fusing ...
Error Message C3451 error displays on main screen stating "malfunction detected. Please call your technical representative" C3451 Any one know what that means and how to fix it? Kindest Regards It is ...
am getting a functional errror on our gestetner dsc424 to replace developer units magenta and yellow. replaced both toners, but error message will not clear, even after turning off and then on again. ...
...changing the belt and drum unit. first you are talking about the FUSER END message that means you have to change the FUSER and as for the DRUM and BELT you have to RESET the TIMER to tell the printer ...
14 questions posted
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions