...Tumble Action Washer Hi, when I shut my Frigidaire Tumble Action Washer door to begin the first cycle (Light wash), it fills with water. The Wash Light does not turn on, but the Rinse light comes on, ...
Question about Frigidaire Washing Machines
...Tumble Action Washer buzzing door lock Hey there, I have a Frigidaire Tumble Action Washer; today I started a wash with the door not entirely closed so the alarm sounded. I closed the door and turned ...
tumble action washer 417: door lock Front load tumble action washer 417: door lock light is on and won't allow washer to start. Worked last night and we didn't move anything. Any suggestions? Mine was
...washer will not start and this code keeps flashing. Frigidaire tumble action washer is the type I have You press the two buttons on either side of the lock icon for about 15 seconds and it clears
Question about Frigidaire Washing Machines
error code E22 ON MY non-digital front load tumble action washer E22 is usually a control board failure.
Question about Frigidaire Washing Machines
Tumble Action washer won't complete the final spin. leaves clothes soaking wet. Had the same problem and fixed with ease. The problem is with the door lock. There is a secondary locking mechanism that
Question about Frigidaire Washing Machines
...to manually turn the knob to off to be able to open the door. It is a Frigidaire tumble action washer purchased March 2002. Hi...You have a bad door lock ..I'm a tech of 10 years seen it lots of ...
Tumble Action Washer stopped working when it only had 23 minutes left. It makes a humming noise and will not drain or spin. I unplugged it and took some laundry out and made sure everything was closed
Question about Frigidaire Washing Machines
...tumble action washer will not agitate or spin. Drain water fine. One of the shock absorbers is broken. would this be the problem? The belt is fine. Yes there are several balance switches in the unit ...
...tumble action model number fwtr445rfs1 serial number xc91198120 Doesnt matter what cycle I run it seems to get stuck in between cycles and makes a little hmming noise.. I have to manualy advance it ...
463 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions