Kenmore 43142 Front Load Washer "replace broken shock" Questions

Ad

Question about Frigidaire Washing Machines

1 Answer

...replace both? Lesks from the drum - a seal because shaking from broken shock or need to tighten screws? Can I fix it easy or?? Power off the wall mains. Open up the machine panel to look interiors. ...

Ad

Question about Frigidaire Washing Machines

2 Answers

...broken?? What you need to check thoroughly are the belt & the 2 shocks (dampers). The dampers should be replaced & fitted tightly, broader ends fitted below. I had the same problem, so I purchase a ...

Ad

Question about Kenmore Washing Machines

1 Answer

...broken shock but have replaced it. Drains fine. Depending on the model number, if a shock has broken the tub might have a broken inner spin basket support broken also. That can throw the spin basket ...

Question about GE Washing Machines

2 Answers

broken shock. Only to find the spring was broken too. After replacing the spring, its worked fine for a couple of years. Obviously I'm looking at this site because I'm having another problem, but this

Question about Washing Machines

1 Answer

suspension springs on the bottom of the tub that could be broken and/or missing. Replace/repair as necessary. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Question about GE Washing Machines

2 Answers

...broken How do I replace the shock absorbers in the washer. just buy the new shocks(should by pair)I know they had 2 way one they have pin anoter kind they have clip lock to the bottom of the sheet ...

Question about Kenmore Washing Machines

1 Answer

suspension springs on the bottom of the tub that could be broken and/or missing. Replace/repair as necessary. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Question about GE Washing Machines

1 Answer

...broken shock, how to change? I opened the back of my GE front end loader and the shock absorber is broken, how do I get the pins out to change? They have little plastic tabs that need to be pushed in ...

Question about Frigidaire Washing Machines

1 Answer

broken shock Now I think drum out of control cause shock to break and I dont know what would cause this? The bearings on the drum may be going bad or the counter weight may be broken off or missing or

The loops on the shocks are broken can I replace them Try this link it should help with replacing the shocks/struts http://appliancehelponline.com/frontloadstrutvideo.html

Not finding what you are looking for?
Kenmore 43142 Front Load Washer Logo

463 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...