...loose in the tub and the 6 innner tub bolts as well. The outer tub springs have been taken loose but the tub will not come out.? I srayed some penetrent in the tub on the tran shaft to get it loose ...
Question about Whirlpool Washing Machines
...tub is loose i can move the tub and nothing else moves it appears to be off track any ideas? My LG washers tub became loose and when I took it apart the spider arm on the tub was corroded and broken ...
...DO I KNOW IF AGITATOR AND TUB ARE LOOSE OR IS THAT THE WAY THEY ARE SUPPOSED TO OPERATE? The tub hangs on 4 suspension rods the agitator is pressed on to the agitator couping. It should not be ...
Question about GE Washing Machines
...bounces minutes within the spin cycle. Happens on an empty tub also. I have replaced motor and sensor. possible springs holding tub loose or off or tub spinning off balance bad bearings or ...
...broke replaced and tub is still loose Which spring? Is this a top suspended tub setup? If the tub is loose it may be fractured in a place not visible to you. Only a skilled techo will find out if
...very loose tub front to back tub is loose and thumps when spinning Check to see if there are broken shocks attached to the tub. Here is a link to the parts if you find that they have
...tub is loose, lift the top cover off by using a non marring tool to pry the front up and lift the cover back on the hinges. Inspect the tub supports for broken or worn rubber shock absorbers. Look at ...
...drum? MAV3757AWW The drum is loose in my topload washer. Extreme vibration when spins. You need to remove the agitator, loosen the tub nut (May already be loose), align bowl & tighten tub
the washer tub is completly loose the tub has come loose loud banging noise will not spin BAD THRUST WASHER IN TUB OR MORE LIKELY BAD MOTOR COUPLER, WORSE YET TUB BEARINGS?
463 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions
