Kenmore 43142 Front Load Washer "drum loose" Questions

Ad

Question about Washing Machines

1 Answer

...loose drum Kenmore model 92590100. The drum is loose and takes up to three spins to empty drum drum lose need more on that drum should move side to side all around if its not draining something ...

Ad

Question about Kenmore Washing Machines

1 Answer

...loose in the drum. Other wise the machine cycles fine. Is there someway to check for bolts or nuts loose on the drum. Thanks, Ken Move the drum around by hand and listen carefully. There should be no ...

Ad

Question about Washing Machines

1 Answer

...If you are sure there are no loose items in or behind the drum, check if the drum is loose (wobble it by hand). Sometimes the bolts holding it to the drive wheel get loose, or the bearing

Question about Frigidaire Washing Machines

2 Answers

...drum is loose. The satin less steel drum on the inside seems to have come loose. The outside part is well seated and secure but the interior drum seems to have become loose. if the drum bangs all ...

Question about Kenmore Washing Machines

1 Answer

looks like its sealed If the inner drum moves or is loose the the inner drum needs to be replaced .At the same time you should replace the rear of the outer drum as this contains the seal and bearings

Question about Kenmore Washing Machines

1 Answer

...drum loose How to tighten inner drum without removing entire drum assembly A loose inner drum usually indicates a failed rear tub bearing. The only solution is to replace the rear half of the tub. ...

Question about Washing Machines

1 Answer

...loose drum/loose coupling or worn out/loose belt Please check the support of drum by opening the back cover. They should be firm and no play. Also check the coupling of the motor and the drum. It ...

...it's a major job and could be expensive. Prices can vary with the amount of replacement parts needed. A loose drum can be caused by various problems. Best get a phone quote first....Good ...

Question about GE Washing Machines

1 Answer

loose part in drum area There appears to be a loose part or rock between the drum and the outer area. How can I access the drum area to remove a loose part/item? unplug machine go to botton remove ...

...how do i stop the drum doing this? If the inner drum is loose the bearing may have failed or the drum shaft spider may have broken. the scrapping will be the drum hitting the heating

Not finding what you are looking for?
Kenmore 43142 Front Load Washer Logo

463 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...