Kenmore 43142 Front Load Washer "clunks spin cycle shocks" Questions

...cycle, not on perma pressed. Any ideas?? Wayne see if the shocks are not broken. if you spin the wash basket by hand and hear a grinding noise, then your bearing would most likely be bad Benham; ...

spin cycle. Makes clunking noise and walks across floor. I've tried leveling it, reducing load size, and setting it on lower speed spin cycles and it still vibrates extremely during spin cycle. Is

Kenmore F/L Washer Model 41743142200 tub loose The tub on my Kenmore F/L Washer Model #41743142200 is very loose. It rotates fine whether spinning slow, fast, counterclockwise or clockwise but about 4

...up a head of steam on spin cycle then slowa down watewrpump comes on then machine tries to go in to high spin keeps doing this.I cganged motor,wiring loom to motor, cleaned pressure chamber no ...

...spin cycle. Belts seem to be fine and shocks are fine aslo Reach in through the door and check to see if the drum has any up and down or side to side movement . If it does move or makes any clunking ...

...spin cycle really gains speed. Hi, it could be your drum bearings are gone the drum would wobble slightly. A way of checking is , machine unplugged put one hand at bottom front and one hand at top ...

...spin cycle My front loading Fridgidaire washer is making a loud clunking noise and it vibrates during the final spin cycle. I know that this might be a brearing problem, so I want help and advice in ...

...spin cycle. I have replaced the shocks once already. Now taken apart, expecting shocks to be broke again, but they are intact. springs that hold drum up are intact as well. drum does move around ...

...spin cycle loud clunking noise LOUD NOISES IN washing MACHINE; LOT OF THINGS TO CHECK, THE BELT LOOSE OR WORN, THE CLUTCH, THE TRANNY, THE BEARINGS BOTH TUB SEAL AND BEARING, THE REAR DRUM BEARING, ...

my washer works great but now during spin cycle it starts clunking banging what is wronbg New shock springs