Texas Instruments TI-84 Plus Calculator "norm 1" Questions

...NORM 1 or NORM 2. CHOOSE NORM 1 To return the calculation mode and setup to the initial defaults, press [SHIFT] [CLR] [2] [=]. This will return the calculator to the following settings: Calculation ...

...Norm" screen, press 1 to select "Fix" and then press a digit specifying the number of digits you want after the decimal point. If you need a manual you may download a copy here. The display modes are ...

...screen Fix Sci Norm 1 2 3 Press 3 from your keypad and the screen will change to Norm 1~2? Press 1 from your keypad and your calculator will be normal again i.e out of scientific notation

a setup screen that shows FIX SCI NORM with 1 beneath Fix, 2 beneath SCI, and 3 beneath NORM. Press [1] to select (FIX) and follow it by the number od decimal digits you want (2 or 3 seem about right)

Answers are coming up as x10? so if i did 6x6 it comes up as 3.60000000x10 (to the power of one) please help, i need to do homework :) Press SHIFT MODE to enter SETUP. Select NORM then NORM 1 or NORM2

...Norm. Press 1 (Fix) followed by a number (1,2,3, etc.) This second number will set the number of decimal digits. In other words, if you press 1 (Fix) 3 all your results will have 3 decimal digits. If ...

...Norm. Press 1 (Fix) followed by a number (1,2,3, etc.) This second number will set the number of decimal digits. In other words, if you press 1 (Fix) 3 all your results will have 3 decimal digits. If ...

...the top part, there look for the "MODE" key, press it three times until you see " Fix (1) Sci(2) Norm(3)", then choose the third option by pressing 3, and then you'll see "Norm 1 - 2?" and press 2 ...

the MODE key until you see the screen giving you the three options "Fix", "Sci", and "Norm". Select Norm 1 or Norm 2. If you select a Sci mode, you'll get "SCI" on the screen in place of the "FIX"

...NORM. Under FIX you have 1, under SCI you have 2 and under NORM you have 3. You cannot remove FIX, unless you replace it with another display MODE (SCI or NORM or ENGineering). You cannot remove DEG ...