Elna 1010 "trouble shooting bobbin problems" Questions

...trouble-shoot jammed machine I had some issues with bunching bottom thread and then the machine jammed. Any solutions for getting it running again? Try these suggestions 1. Change the needle--use a ...

...trouble shooting - YouTube ? 2:53 https://www.youtube.com/watch?v=8RtOXAtheyo Apr 25, 2012 - Uploaded by tivaxTV Just take out the bobbin holder and replace it back. ... How toget the Thread from the ...

...trouble shooting solutions from the manual but no luck. be sure that the thread is routed properly. Then check on the bobbin holder, it may be defective. Be sure to use a brand new needle. Remove the ...

Trouble shooting a bobbin threading issue for a Singer 5417C Hi, let me start with a big disclaimer here -- I am a complete novice with this machine and have only used it once or twice, a few years ...

...trouble shooting on you tube, tried all different tensions still same results. Have a Taylor professional 834fb cannot get a complete stich the bobbin thread has big loops of thread. have even tried ...

trouble shooting manual and it won't go off. The presser foot won't engage and therefore the machine won't sew. What can I do please? contact pfaff's customer service about the problem or you can call

trouble shooting my machine was sewing fine one minute and then started getting snagged every few stitches. it appears that the thread gets caught on something behind the bobbin casing. After that the

...bobbin case the wrong way, or top tension discs playing up/too tight or thread catching somewhere in the threading path. I'd suggest that you trouble shoot this and refer to the manual for ...

trouble shooting the bobbin case, go to page 76 in manual and folloing images, take out bobbin case, clean and replace it. Turn machine off first and once its back in turn it on and see if the 88 code