Kenmore HE2 Plus Front Load Washer "clean clothes" Questions

...clean washer cycle. No clothes in washer and I have unplugged machine. Washed a load in between and still get rL on ''clean washer cycle. The rl code is displayed when the control detects a load of ...

...could be wrong...I've only had the machine for 14 months. sounds like not pumping very well, try cleaning the filter/ ...

...clothes. I have used Affresh to clean the boot and the drum, however I'm still getting dark "water marks" and black marks as if someone spattered motor oil on the clothes. I would recommend getting ...

...test. All lights flash, etc., then all blank except "clean clothes" light flashing. What do I do next? Any ideas? Thanks! it sounds like u fixed the problem. have u tried a load of clothing ...

clothes clean. After several wash cycles, there is still a sudsy residue in the wash tub during the rinse cycle. The filter on your pump is probably clogged with lint and stuff. You have to remove the

...clothes. Sometimes the vent flap on the outside exhaust is stuck shut. Clear dryer exhaust venting is critical for proper operation. Several companies offer a vent cleaning service where they ...

...If you want to you could just put some old clothes or any old fabric in the machine to test the cleaning, but it's not

...to turn it off is to unplug it. We've tried a litany of things that others have done on the blogs--cleaned detergent holder really well, taken out screen around drain pump and cleaned, run machine ...

...clothes in the washer during the clean washer cycle. This code should only come up when you're trying to run a clean cycle. There can be two causes for this message if there are no clothes in the ...

...clothes in the washer during the clean washer cycle. This code should only come up when you're trying to run a clean cycle. There can be two causes for this message if there are no clothes in the ...