Toshiba RDXV60KB DVD HDD VHS Recorder "tv switch working" Questions

...switch my tv off @ the main switch button it take a week or two to turn on again, when it on i turn the tv off on or off on the small soft button on the side then it works perfect. Someone switch the ...

...to plug your go video to another socket on your tv.if there is only one , then you need a switch box.you can plug the converter and the go video in the switch box. so that you can use it

...switch my tv off @ the main switch button it take a week or two to turn on again, when it on i turn the tv off on or off on the small soft button on the side then it works perfect. Someone switch the ...

...switch. The video recorder works fine with old VHS cassettes playing. I did not try recording yet with OTR but this should work also I hope. The video recorder works now in combination with an old ...

...TV. (For the switch, you would connect both the DVD player and the Smart Cycle to the switch and then the switch output to the composite video port on the TV. For an example switch, see ...

...wire inside TV could be damaged). If the 'DoraTV' works like a regular TV,then look for a "INPUT" switch on TV or remote control if it uses one. On the tv doesn't have a input button

...TV/Video switch set to "colorstream", I finally got the video from the DVD. This was odd, because my TV says it does not accept progressive scan and my settings have always been with the switch on ...

...switch the input on certain older rca tv's you could go to channel 00 and it would set it to the input with the switch you shoudl be able to use it by putting the tv on channel 3 Right now I have an ...

...TV to get to channel 4 thinking that might work as a dvd station, but it jumps directly to channel 7. Do you have any suggestions? I'm sure it's wired correctly since he had it working when he left, ...

...TV(i.e. composite, s-video, component)? Some DVD payers and TVs have menus to switch inputs and if you somehow switched off the input your players are connected to, you'll get a "no signal" message. ...