Depending on the type of system, its either outside below slide out, on sides or up above visable when rooms partly in
If you lift the foot of the bed, you will have storage. Look for a hole on the near edge of the foot to lift the secondary floor panel. In here you will have access to the motor, wires and guide rails for the slide. Depending on what you need in this area (troubleshooting), keep in mind you should have 12VDC unless the battery disconnect is off/open.
If the bed is on the slide, more than likely the mechanism is under it. If not then it should be outside in the under belly.
I would check for voltage at the switch first.
You need to get to the motor and see if there is power going to it in both directions. Does it sound like the motor is running but nothing moving?
190 views
Usually answered in minutes!
×