The clutch on this model is hydraulic and is 'self adjusting", if the clutch is slipping the plates are worn out and in need of replacement. This information comes directly from the factory service manual.
You may have used the wrong oil in the bike, this can also make the clutch slip. Use 20w50 Motorcycle oil only, Drain the old oil out, and replace. This might help if you did not wear the clutch out too much.
Doing the clutch plate kit I don't have to take the engine or the heads off do I same motorcycle 2001 vl1500 intruder
×
3,153 views
Usually answered in minutes!
×