Looking for exaust

Sounds like a potential exhaust leak due to a hole in the exhaust system. Perhaps somewhere in the pipe, perhaps in the catylitic converter. Gonna have to get in there & look for it. they sell exhaust patch kits, but that's really just a temporary fix. Eventually, That piece of the exhaust system will need to be replaced.

Not a good idea. If you release the back pressure on the exhaust you run the chance of burning the exhaust valve.

you have an exhaust leak well forward in the vehicle and it is accumulating under the hood and being drawn into the ventilation system. get the exhaust checked, if it has a turbo charger, look there first.

Hi there, What I would do without knowing what kind of exhaust fan you have is Google it online. Or, if you have the make, model number, etc., and take it down to your nearest home depot, lowe's, etc., or heating and supply company close to you. These are pretty common exhaust fans, so you should have no problem finding a replacement. Good Luck with this, and if you have an other problem regarding your fan, feel free to contact me and I'd be willing to help you out.  - Jim

It is part of the exaust and looks like the pic

clcik here ---> http://www.autopartswarehouse.com/partsearch/Plymouth_Catalytic_Converter.html?apwcid=X1093010841W41260599c6350&apwkwd=Plymouth+Catalytic+Converter&gclid=CJfu6qz4zZsCFQE0xgodlUqSmQ

This will help you identify it and locate it on your exaust sytem..

Hope this helps !!
Please rate me good ;o)

If you are getting exhaust fumes in the engine compartment I advise checking the exhaust manifolds for cracks. When the engine is cold remove the heat shield from the manifold using a 12mm socket and inspect from the top and underneath for any cracking.

your exhaust temp sensor is bad or broke it is located in the main exhaust under the seat on the right side of the exhuaust one wire going to it u cant miss it

hi im wesall o2 sensors are located in the exaust system yours has one before the converter one after if it has duall exaust before the cat on drivers side will be upstream sensor bank 1 after cat right side will be bank 2 sensor 2
thanks wes
ps please rate me

the 02 sensor will be in the exhaust manifold. look between engine and firewall you should see it in the middle of exhaust manifold

If you are going to rivet or bolt in on you need to drill holes through both tip and exhaust pipe.

I like having them welded on to prevent problems in the future. Any exhaust shop can do that for you.