When I apply the front or back brake the starter

This looks like the switch that activates the brake light when pulling the brake lever. If you brake lever will not return, there is most likely a mechanical bind somewhere in the system. Since this scooter has a Combined Braking System, both brakes are applied when the lever is pulled. The rear drum brakes are disengaged with a spring attached to the actuating rod. It may help if you adjust that spring to apply more force to disengage the brake. The front brake is a disc brake, and it may be that the piston in the caliper is sticking. There is no spring on the brake lever itself, but it may be that the pivot bolt is too tight and needs to be loosened.

2003 Honda Dylan SES 125 Scooter Engine ebay - YouTube

? 0:47
https://www.youtube.com/watch?v=DzAByfS2OAY
Nov 21, 2012 - Uploaded by TheShamefulsin
Short video demonstrating a 2003 honda dylans engine, that it starts and runs for the purpose of selling the ..

honda dylan in United Kingdom ' Motorbikes & Scooters for ...

https://www.gumtree.com/motorbikes-scooters/uk/honda+dylan

GumtreeMy 2003 Honda Dylan ses 125, unfortunately it was stolen from me, hence the .... uk plate GF07 XJK,bike has only few scratches, last time I could not start it, but ...

Hi Geoffrey
One of these sites may be able to help...

Regards
Alan
CMPO Brake Pads FA054 DB250 DP107 SBS536 VD120 333 BP034 Scoot
or
Scooter Brake Shoes Y527 130x28 5mm for Xingyue Cobra 125 LLX125T 11

yes this is very common for dual front brakes. The thought behind this is that you will get a 60/40 split in your braking from back to front to maintain control in a braking situation.the hand brake gives you additional stopping power in a panic situations.happy riding

Your brake my be locked up due to corrosion . Take scooter and tilt it up so you can see under it and take spraw lube and spray where the lever goes into the brake assy then work up down or back and forth and it should lossen up

Make Model
Honda XL 125R Paris Dakar Year
1983 Engine
Air cooled, four stroke, single cylinder, OHC, 2 valves per cylinder Capacity
124 Bore x Stroke 56.5 x 49.5 mm Compression Ratio 9.4:1 Induction
PD52 Ignition / Starting
CDI / kick Max Power
12 hp 8.7 kW @ 9000 rpm Max Torque
10 Nm @ 8000 rpm Transmission / Drive
6 Speed / chain Front Suspension
Telescopic forks Rear Suspension
Swinging arm Front Brakes
Drum Rear Brakes
Drum Front Tyre
2.75-21 Rear Tyre
4.10-18 Seat Height 840 mm Dry-Weight
109 kg Fuel Capacity
17 Litres