SOURCE: ford starter won't disengage even after the ignition is switched
sounds like to me that the ignition is bad and sticking on the start positon
SOURCE: 1984 ford f-150 351 windsor, automatic, starting trouble
that would be your ignition switch ive had several do that
SOURCE: 1993 honda nighthawk has no power. I put a new
Hi and welcome to FixYa,
With the indulgence of DickCanFixIt...
Almost always, in instances such as you have described, the main 30Amps fuse of the 93 CB750 (F2P Retro) would have blown. The main fuse is located along with the starter relay. To locate the starter relay, follow the + cable from the battery terminal.
Additionally, once power has been restored, you may want to check the regulator and CDI as they are electronic and therefore prone to damage on reverse polarity.
Good luck and thank you for using FixYa.
SOURCE: 1983 Honda Nighthawk 650 stopped starting
Sounds like the starter solenoid went bad. Turn the key on, Make sure it in N. Take a screwdriver and jump the terminals on the solenoid and see if it turns the starter over and starts the bike. If it does then the solenoid needs replaced.
261 views
Usually answered in minutes!
×