Will not start 2008 Harley Davidson FLSTF Softail Fat Boy

William Miller

• 9179 Answers
• Posted on Nov 28, 2007

SOURCE: After changing a blown oven light, the clock works but nothing else turns on, including the fan, light, microwave

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, linked here on Fixya:
http://tinyurl.com/yzjozk

SOURCE: 1991 N14 Pulsar SSS, disconnected

HI
IT IS FUNNY ??????????
CHECK FOR FUSE BURN OR LOSS CONNECTION ??

WITH MY BEST WISHES

SOURCE: Turn Signals, hazard lights & instruments inop

must be the dash connection in the back, need to demount dash panel, and spray wd40 on the connections.

electronic & computer repair& servicre

• 12061 Answers
• Posted on Feb 01, 2010

SOURCE: Won't heat and turntable doesn't turn

In all likelihood the mangnetron has failed, or perhaps even something in the Power Supply. or a fault that is shutting the system mangnetron down, for safety reasons You need to have it serviced by a reputable service centre/man. Ensure you get a firm "Quote" before proceeding, and remember these days the cost of repair can equal or exceed the price of a new one.

SOURCE: Brake lights,turn signal and horn not working...

Check the wiring within the headlight shell--look for connectors that may be corroded or pulled loose. A little WD-40 will favor connection integrity when sprayed into the connectors, then coupling and uncoupling them several times. Hope this helps!