I have 2015 Low rider. Where can I locate the fuse box to check out if a fuse is blown for my tail/brake light? @
SOURCE: Front light, tail light and
for the dashboard... have you checked the intensity control? It happened to a friend of mine.
SOURCE: tail light malfuction
check the brown wire on the tailight harness on the truck chances are it shorted and broke away from the assembly. the fuse is in the junction box under the hood.
SOURCE: 93 Dyna low rider fork oil.
your local hd shop should be able to answer this for you as its a mesured amount and to much or too little will make the bike not handle right
SOURCE: 2001 GMC Jimmy break lights not working but all
Check the brake light switch should be a orange wire with 12v then a white wire with 12v when the pedal is pressed.If htat cks good then ck the hazard switch by moving it up and down and wiggeling the knob with the brake pedal pressed if they start working then your multifunction switch is bad and needs to be replaced.
Testimonial: "We check and you were right on the money. It's the hazard switch carrier. Thanks for you help."
SOURCE: on a 1985 toyota corolla
There is another fuse panel by the passengers foot. I don't have a map for it, but the fuse would say parking lts or inst lts.
1,698 views
Usually answered in minutes!
×