You can loosen the tank at the back by undoing the two bolts that double as seat brackets, once youve done that you can lift it up enough to gain access but it will slip off backwards if you undo the gas tap and release the breather pipe under the tank aswell, the tank is held in place by two rubber bungs at the front that slip into two locating grooves on the tank,, slip off backwards and slips back on forwards,,you wil need long reach sparkplug sockets,, and when putting them back in finger tight them first to make sure youve got em in right
Take tank off and the plugs are set down in the cylinder... make sure when you put the new ones in you dont drop them down in the cylinder so it dosent mess up the plug gap
SOURCE: cant find
Remove seat and gas tank. Plugs are at center of heads. Follow the cables (black cable about 1/2" thick. You will need a very long plug wratchet to get at them.
SOURCE: spark plug type and gap setting please
I believe NGK brand is the best. Get the stock plug for your bike from the dealer. Gap should be 30 thousandths.
SOURCE: 1999 suzuki marauder hesitating, dropping cylinders,
try a can of Seafoam carb cleaner 1/4 can to two gallons gas get right on it hard, it might take about 10miles before it'll be cleaned out.
4,599 views
Usually answered in minutes!
×