2006 Harley Davidson FLSTSCI Softail Springer Classic remove the front axle nut cover

SOURCE: 1998 harley davidson softail custom primary cover bolt pattern

Are u asking for the torque sequence for the outer primary cover ?

SOURCE: battery dead

there should be bolts under the rear fender that hold the seat in place

SOURCE: change rear wheel on Harley Davidson

first ya need to suspend it in the air using a bike jack loosen chain tension on it unbolt the axel and it should come out from the rear of the bike

SOURCE: correct torque for rear axle nut on 1997 harley davidson fat boy

Harley manual says 60-65 ft lbs... do NOT exceed this or wheel could seize

SOURCE: removing front wheel from harley davidson heritage

first take off the brake caliper takes a 10 mm socket..Next jack front of bike up just enough to take pressure off front tire...take off the axle nut lbit more to take pressure off axleock washer and flat washer...Next remove two axle support nuts from the right side of bike 1/2 in socket. now jack bike up a hair more to releave pressure off axle push, hammer with a rubber hammer or what ever it takes to drive it through. jack bike up so it clears fender. Sometimes the tire won't clear the fender bolts if so just release air from tire and it will clear. good luck. Its not hare at all.