SOURCE: audi a4 engine management light
Go to AutoZone or Advance Auto Parts and have them scan the ECU (they do it for free, where a shop will charge you). They'll give you the codes, and you can post them here. Once you do that, I can help you narrow it down.
SOURCE: Engine management fault
this is going to sound nuts but its true.if your brakelight switch is defective that light will flash.
see if you brake lights are working.if it is automatic trans you will notice the shifter will not always release when you depress brake pedal.
if its not brakelight switch get it autoscaned with a VAG.com
SOURCE: cagiva river starter problem
You can try running a positive wire directly from the battery to the post on the starter to see if it's a starter problem or a handlebar or wiring loom issue. If the stater spins when you hot rod it then i would go for thw wiring. but start at the problem ( being the starter and work your way back. You can use a test light to see if you're getting power at the starter when you hit the switch. If you aren't getting power at the starter I would check you clutch safety swith ( attatched to the clutch lever perch ) and then go to the kickstand switch. The kickstand will turn it off, so look down where it mounts to find it.If either one of those are bad or unplugged, the bike should'nt start for safety reasons set up at the factory.
I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb
SOURCE: sym jet 50 , wont kick or electric start
compression may be getting low if this is a progressive problem.
SOURCE: Citroen Xantia Temperature warning light
My friends ,especialy in a few first miles my Xantia (year 1995) has very stiff steering , most from newtral position .Thak you
1,091 views
Usually answered in minutes!
×