I have a colman 200 ct200 flashlite the bulb is bad how do i replace the bulb ..

go on line and search for Replacement for Coleman 5359-130c Light Bulb

The bulb will need replacing.

Have you try google images search https://www.google.ca/search?q=Honda+CT200+auto+ag+wiring+diagram&espv=210&es_sm=122&source=lnms&tbm=isch&sa=X&ei=9h3QUtquGOmosQSBqIGYDA&ved=0CAkQ_AUoAQ&biw=1280&bih=619

contact colman tent manufacturer for the instructions

The extra bulb in there could be broken, get another bulb and confirm.

I would suggest you replace the bulb as the filiment on the highbeam is separating

pull the bulb strait out it should have two pins,the spring in the bottom also pulls out ,there you will find your extra bulb.

Try King Power ph#323-262-3517 or Minit ph#323-264-7006. You might also try some of the bigger box stores or lumber yards Hope this helps I am on the east coast

1. Unscrew the "bell" (top) of the flashlite. 2. Remove the bulb by pulling upward. 3. Replace with new bulb (be sure you have the correct bulb . . . it will have two small wires protruding from the bottom). 4. CAREFULLY insert new bulb through hole in the bottom of the reflector. 5. Screw the top of the flashlight back on.

I have three colman coolers with broken hinges. I would like to find some new hinges to replace them . model # 6270 6273