I suspect the mechanical contacts for the current regulator have fused together. Disconnect battery and remove regulator. Remove regulator cover and check to make sure the contacts are free by gently prying them apart with a small screwdriver. Clean contacts with fine emery cloth and reassemble. https://www.draganfly.co.uk/index.php/ariel/4-stroke/cateory/category/739-charging-system
SOURCE: Have Yard Machine (model 12B264c062)
diaphram ,good idea but check fuel stem down in tank,it may have crak in it ,also disasemble carb and froce air (compressed air ) in all orfices and use welding tip cleaners and clean out all orfices,jets ,ports etc.
SOURCE: when the battery is in the charger it flashes red
I called casio and they told me that when you have a red flashing light on the charger it means the lithium battery is no longer any good. They offered to send me one free of charge. It's been several weeks and I have yet to receive it.
SOURCE: Briggs & Straton 20 HP, two cilinder engine idle speed
Surging is usually caused by a lean condition You can try to turn the mixture screw ccw about 1/4 to 1/2 turn. If this does not solve the problem your carb will have to be removed, cleaned thoroughly, and reinstalled.
SOURCE: Microtek Inverter not fully charging the batteries
xenion pure shinewave inverter not charging fully
SOURCE: Dc 31 animal: even when
Hi there,
Sorry to hear you're having difficulties with your DC31 Animal. It's probably best if you get in touch with us directly, so one of our experts can run through some troubleshooting over the phone with you to identify the cause of the issue. They'll be happy to recommend the best course of action. You can call us free on 08002980298 (UK), or 1866MYDYSON (US). We'll look forward to hearing from you.
Kind regards,
Jack
Dyson Online Customer Support
89 views
Usually answered in minutes!
×