Hi I'm struggling to start a zzr400k the bike was standing for a year so I've cleaned the carbs and put new needle and seats in because the needle had ridges on it and the bike starts after swinging for a while then idle's for about 5minutes then once I give throttle it dies immediately then struggles to start I've checked all the spark plugs and they all working perfectly can someone assist me please?
SOURCE: kawasaki 300 bayou won't rev up.
No guarantees but try this. Pull the slide from the throat of the carb. Now move the clip on the jet needle down one notch. This will richen the low end mix. Two notches may be needed but do one notch at the start.
114 views
Usually answered in minutes!
×