How do I find the part numbers I need to fix a 944.60?

Can you provide the exact Make, Model and Kenmore model number? ..........

Kenmore model numbers use the format ###.######## with the first three digits of 110 for Whirlpool manufactured machines.........

The model number on top load washers is usually found by lifting the lid and looking above the tub.

The Fixya numbers are Stock Numbers.

Since basic top load direct drive, top load electronic and front load washers are very different, the actual Model Numbers are necessary to correctly diagnose the problem.

IF THIS IS A BASIC KENMORE / SEARS TOP LOAD, DIRECT DRIVE WASHER THE PROBLEM IS LIKELY A LID SWITCH. (EASY AND INEXPENSIVE TO FIX)

I'D NEED TO KNOW THE BRAND AND MODEL NUMBER TO BETTER SUGGEST A SOLUTION.

You need to change his Voicemail number. On a Nokia this is fixed by going to your Tools/Settings and selecting Voicemail, and changing the Voicemail number there. You can get your dad's Voicemail number by calling up the customercare. But if you remove your number from the assigned Voicemail number, it should fix your problem.

Hi,
You need to change the display format.
Press the [MODE] key a certain number of times until the screen displays Fix, Sci, Norm on one line, and 1 2 3 on the next line, with 1 under Fix, 2 under Sci and 3 under Norm.

Press 1 (Fix) followed by a number (1,2,3, etc.) This second number will set the number of decimal digits. In other words, if you press 1 (Fix) 3 all your results will have 3 decimal digits. If you choose 0, your results will not show decimals.

Hope it helps.
Thank you for rating the solution.

Hi,
You need to change the display format.
Press the [MODE] key a certain number of times until the screen displays Fix, Sci, Norm on one line, and 1 2 3 on the next line, with 1 under Fix, 2 under Sci and 3 under Norm.

Press 1 (Fix) followed by a number (1,2,3, etc.) This second number will set the number of decimal digits. In other words, if you press 1 (Fix) 3 all your results will have 3 decimal digits. If you choose 0, your results will not show decimals.

Hope it helps.
Thank you for rating the solution.

Sir,
Due to security reasons we can't send serial number sir. Send mail i will send u.

Thanks Good Luck
Appreciate to rate as "Fixya"

Hello,
If I understand correctly you result do not display any decimal.
If you want a fixed number of decimal digits (exemple 2) Press the [MODE] key a number of times until you reach the screen that displays Fix Sci Nom and under them the numbers 1 2 3
Press 1 to choose Fixed format followed by 2 for TWO Digits
3 decimal digits [MODE] ---------[1 ] (Fix) 3
Hope it helps.

The part number is DUNTW7305DS88, DUNTW7305DS80,DUNTW7305DS11, DUNTW7305DS15
Not really sure which one is right - I found the part number on
Precision Roller.com they have only one part number on there web site # H3164 It cost $595.00 if your not a vender.

Whats the model number? Let me know that as it may be as easy as replacing the power supply circuit board depending on the model number of your set.