At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your asking how, then on this model I think they just push into a slot, if not check for screws & a plate holding it in. Pull or unscrew the old one & reverse the process for the new one.
Well, when you take off the fork make sure you empty it first before anything else then make sure that the fork pressure spring is released before changing the seals. The fork oil amount should be no more than 200 cc or no less than 190 cc
you oil pan bolts of the bottom of the oil resivour the gaskit fits in between the surfaces where the pan meets it creating a seal witch in your case needs to be replaced this procedure replaces that gaskit to create a new seal
to replace that seal you do not have to overhaul the motor. but you have to drain the coolent and place the motor up side down and open the crank case and pull the stator of as well as the internal coil pack. the internal coils and stator must be off befor you can open the crank case. replace that seal and get black form a gaskit and put her back thogeather and you should be good to go
×