Question about 1997 kawasaki ZZR 400
Zzr 400 backfiring but won't start @
Posted by Anonymous on
Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Faulty main circuit breaker and or connections.
4. Faulty ignition coil and or connections.
5. Faulty spark plug, oil or gas fouled, wrong heat range or service type, wrong gap, loose in the cylinder head, broken electrode or insulator.
6. Faulty spark plug cables, leaking or broken, internal damage check for spark leakage in the dark.
7. Faulty ignition module, switch, CKP, MAP, CMP, sensor and or any connector in the ignition circuit could have corroded, loose, or broken pins/sockets
8. Burnt exhaust valve or air leak in the exhaust system.
9. Improper valve clearance (too tight).
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Won Start Just Turns Over And Backfires Fixed
http://www.kawasakimotorcycle.org/forum/kawasaki-streetbikes-sportbikes/31762-need-help-bike-wont-cranks-backfires.html Kawasaki zzr 400 manual pdf
OEM Parts for Kawasaki
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on May 29, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
that box is called the air box, its where you engine breathes in its air. you say its leaking oil? these boxes are normally a bit oily but only really surface oil. If you can actually see liquid oil you have a problem with your petrol shut off. When the bike isnt running petrol will leak into the engine through the piston. When you start the bike all the petrol mixed with the engine oil will be pumped back into the air box. also check the level of the engine oil, if too much has been put in there then that can also be pumped back into the air box. If the petrol and oil has been mixing you must change the oil as petrol thins the oil and your bike could catch fire, the engine wear will be really bad.
Posted on Aug 29, 2009
Mistake #1, never try to jump start a motor bike, you may have blown the on board PC unit, best bet is to take it to good Kawka mechanic and let them fix it, bikes these days are fairly complicated..
Posted on Feb 05, 2010
Firing order is 1:2:4:3
Firing mark is before T mark (TDC) when turning crank clockwise
Please rate this solution well (if it has helped !!)
Any comments welcome
Posted on May 11, 2010
Tips for a great answer:
Jan 10, 2013 | 1995 kawasaki ZZR 400
Nov 17, 2012 | 2002 kawasaki ZZR 400
Sep 02, 2012 | 1993 kawasaki ZZR 400
Sep 01, 2012 | 1997 kawasaki ZZR 400
Aug 09, 2011 | 1994 kawasaki ZZR 400
Oct 09, 2009 | 1990 kawasaki ZZR 400
Jan 15, 2009 | 1995 kawasaki ZZR 400
Dec 01, 2008 | 1994 kawasaki ZZR 400
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: