I have a yz 125 2001 model when i pull the clutch in there is tention in the cable as i can feel it pulling the pressure plate away from the clutch plates , but my bike still seems to stay in gear. ive had the friction plates out andt they all soon to be in good condition .the bit where the metal rings attatch to moves freely when the clutch frictionplates are not in. it all happened from nowhere i was out one night then when i went out the next day the priblem was there. anyhelp would be reaaly helpful.thank you. Ryan Dundas
Hi m8,,this might sound stupid,, but in winter dayz and salty conditions ,cables corrode in side,,so i can start some where to help,, 1st take the cable off the handle bar,, and the clutch casin,,get a little bit of oil in a jam jar or any thing like that,,dip one end of the cable in the oil ,and keep pullin and pushing the inner cable as if u were trying to draw oil up threw the inside of the cable ,, turn cable the other end and repeat,, try that 1st m8,, still have probs come bk, and il go threw the next step,,
319 views
Usually answered in minutes!
×