2000 Harley Davidson XL 1200 C Sportster Custom Logo
Posted on Mar 17, 2009

Trying to hook up new gauges on my 2005 1200 xlc. the one wire i cant figure out is the speed output wire gets conected to the databus?

3 Related Answers

Anonymous

  • 80 Answers
  • Posted on Jun 08, 2009

SOURCE: 2005 Harley Davidson XLC. There was a pop from

Check the front wheel. The speedo drive normally resides on the front wheel hub. Take a look at that and see if it looks normal, I'm thinking your cable broke inside the speedo drive which made the "pop" sound. There is a possibility the drive could also have cratered but this will have to be determined when the speedo drive is removed from the front axle and inspected for damage and function.

Ad
stephensaon_

Rob Stephenson

  • 284 Answers
  • Posted on Aug 27, 2009

SOURCE: 2005 Harley Davidson XLC Horn doesnt work

Check you ground to make it's secure but more than likely, your horn went bad. we had alot of bad horns in the year and the year behind it.


I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb

Anonymous

  • 4565 Answers
  • Posted on Mar 28, 2011

SOURCE: will a gas tank from

I doubt it seriously as the Dyna frame has a square backbone. But, you'll never know for sure until you try.

Steve

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What are the wiring hook up for a speedometer for a 1998 Harley Davidson 1200 Sportster

ignition-orange wire 1
databus-light green/violet tracer 2
battery-brown/grey tracer 5
accessory-orange/white tracer 6
ground-black 7
trip switch--black 8
fuel light-yellow/white tracer 9
trip switch-black 11
screenshot 2022-11-13 at 10.24.09-undefined-undefined-0.png
0helpful
1answer

Only one subwoofer beats

how do you have them wired? have you tried to cross wire or conect the speakers to gether
1helpful
1answer

How do I conect external speekers and get them to work? Sansui 22

Depends. What are you hooking external speakers to? Car radio? If the speakers do not exceed the output of the radio, you can directly hook speakers up to the radio by connecting 2 wires. If they do exceed the radio output, you will need an amplifyer.
0helpful
1answer

My son has a new headset for x box with no instructions, its a turtle xlc i think. could u please let us know where all the wires go. his friends can here him but he cant here them????

ummm....did you plug ALLLLLLLLLLLL the wires in? there are 2 parts tyo the wire. One that goes into the tv, and the other that goes into the controller?
0helpful
1answer

Cant hear anything out of my speakers connected to djio

Are you using a Mixer as a pre-amp for this set-up? For example, I have a Numark CM200 where I have all of the inputs and outputs I need to run. DJ IO is connected to Chanel 1 and Chanel 2 Lines in my mixer. The DJ IO is conected to my computer by USB cable. In Traktor souncard settings chanel 1 is set to (3&4) Chanel 2 (2&1) also, devise set up is Numark DJ IO and in External mode. Of course the mixer is conected to my amp and speakers conected to the amp as well.
0helpful
2answers

1990 chevy van G20 gas gauge shows full at all

The float inside the tank needs to be replaced. or one of the wires has a small short in it.
1helpful
1answer

Need wiring diagram for 1967 camaro v8 changed from external regulator to alternator with internal regulator

I am assuming you are now using a 1976 style GM alt.
The most common and popular model.
You need one 10 gauge wire from the battery to the alternator output.
This can be run directly from the battery +.
Run a short 10 gauge wire from alt output to large wire at regulator plug on alt.
Run small wire on alt reg plug to Bat light wire.
A new alt regulator plug pigtail can be bought at any parts store and is recommended.

The existing regulator should have the connections marked.
One of those wires will be the bat light wire if needed.
If you have a amp meter or voltmeter in the vehicle.....use your existing large output wire (usually red) to hook up to the new alt output connection.
0helpful
1answer

2005 Harley Davidson XLC Horn doesnt work

Check you ground to make it's secure but more than likely, your horn went bad. we had alot of bad horns in the year and the year behind it.


I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb

0helpful
2answers

Can't connect to Xbox Live

mtu is not working cant hook up xbox live
Not finding what you are looking for?

266 views

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...