How to replace starter switch on 93 harley fatboy flstf

SOURCE: 2002 FLSTF Fatboy needs oil change

I have a 05 Fatboy and the drain plug is hidden inside the frame rail on the right side by the swing arm it's a 5/8s plug.

SOURCE: oil leak from tube

Sounds like your hose for draining the engine oil to me, there is a plug in the hose with a screw-ring that should be tight round the hose before it slips into a spring clamp on the bottom of the frame just behind the gearbox on your bike, hence just in front of the rear wheel. I suggest you have a look there to start with anyway

SOURCE: picture wiring diagram for 2003 harley fatboy

May I suggest a trip to your local library. Cycle repair books should be in 646 stacks of reference.
Otherwise you can Google for 2003 Clymer Service manuals on the internet.
I think Clymer had electrical diagrams in their books. I doubt that any except the HD service book would have anything about the physical location of the harness, but the pictures in the other books would help you.

Gar

• 384 Answers
• Posted on Mar 22, 2010

SOURCE: Harley wheels

Don't think so. Sportster and Dyna wheels interchange, depending on the year. Check with dealer for the Sporty/Dyna wheels that will fit.

Testimonial: "good answer"

SOURCE: Replace starter clutch on a 97 Harley Fatboy

You have to remove the starter from the bike and then take the starter apart. Remove the starter motor from the solenoid housing and then remove the gear housing from the front of the solenoid. The starter clutch comes out. You'll probably have to remove the bearings from the old unit and install them back onto the new unit. If you need an exploed view drawing, contact me directly at [email protected]. Remind me of what you want.

Good Luck
Steve

Good Luck
Steve